diy projector from the Philippines

[hucker21]

Originally Posted by planet10

It is OK.

dave

the mode remove the link site on my post maybe its not ok. ill pm you for the link. or just google senario AL 100 this is the name of the product.

[ywh]

thanks! but there is no any inf of size, IC

[hucker21]

Originally Posted by ywh

thanks! but there is no any inf of size, IC

keep on searching.

Ok try this one hope this will pass the restriction of the mode since this link is not selling this product, he just put some price he found from the net. and give a short review on the product. in his post it only cost less than $ 50 about the size of the product I'm not so sure but the weight is less that 3 lbs. the sized i can compare it to a 1.5L plastic cola or soda bottle.

[hucker21]

Originally Posted by ywh

thanks! but there is no any inf of size, IC

forgot to past the link its here.

Click here

[alanpaul]

@ HERTZ
i have completed the projector it is working realy good ,i used coby lcd 7 '' & 150w osram lamp , and the lens you gave me !! i am very much thankful to you hertz,i don't know how to attach the picture ,i am waiting for the 250w shart ark lamp from osram (baby sharxs)
thanks uuu
will send the photos by mail

alan

[viki_v2]

Hi hertz,
When i saw the images by yoyr projector, iwas spellbound ,i dont know for how much time i just satrred at those images , i just felt i was in a movie theatre. Superb colours, brightness, iwill have to gather words for you, right now i am speechless.

I have been trying to make a projector for me, but till day i wasnt so charged as i am now.

i am buying 5.6" 720p lcd+controller from lumenslab.

can you answer some of these questions for my clarification-

1. Replaces 160mm focal collimator fresnel with 120mm focal length.
which fresnal lens are you talking abt replacing front or back.
accordind to my knowledge, the fresnal set come with focal length of 216/343 mm.

2. Replaces 127mm focal leng condnesner lens with 280mm focal length

3. What is the size and cost of lcd in the projector ,images of which are published on page no 68 and page no 70.

4. what type of box are you using straight or folded.

please help and reply and guide , as me and 4 of my friends are desperate in getting the projector made, and im the one who will be making it for them.

[hertzblaster]

Replaces my 250w HSD bulb with 100w LED.

Still using the 7 inch lcd and lenses.

HSD bulb is still brighter but LED produces a more even brightness in the projected image and with much lesser hotspot.

[hertzblaster]

[WattoDaToydarian]

Originally Posted by hertzblaster

Replaces my 250w HSD bulb with 100w LED.

Still using the 7 inch lcd and lenses.

HSD bulb is still brighter but LED produces a more even brightness in the projected image and with much lesser hotspot.

Are you actually saying that you replaced your 250w bulb with that 100w LED and the sample images you attached under it are the result from the LED?
I didn't think the LED was that bright. Could you post an inside image of your rig with the LED plz?

[hertzblaster]

Originally Posted by WattoDaToydarian

Are you actually saying that you replaced your 250w bulb with that 100w LED and the sample images you attached under it are the result from the LED?
I didn't think the LED was that bright. Could you post an inside image of your rig with the LED plz?

Now using 81w 9x9 led arrangment but led lumens output is 9000lumens. Projected image is brighter than than 100w 10x10 led arrangment with 9000lumens also.





You tube videos