DIY Video Projector - Page 272

Forrest · 25th June 2002, 04:23 PM

Hey folks...

Been reading this threading continuely for just under a year now, posted a few times back in the day but ive been broke, studying and not really able to get my hands on the necessary equipment needed to start up until recently....

Just wanted to add my 2pence and say thanks everyone for posting and putting forward there ideas, I'm sure there's more than enough information here to give anyone the helping hand that they need to get going, i know it's helped me...

Wherever the next thread pops up I'll be there and this time posting what i've been doing

Keep up the good work, Congratulation to all who have succeeded and good luck to all those striving to succeed.

Thanks everyone

best regards

John Forrest

vdi_nenna · 25th June 2002, 04:23 PM

Mike,

Please re-read what I wrote slowly.

Everyone,

I think the thread should be readable when closed, if that is possible, I don't know. If Jason says it is, then excellent.

If you at least close this long, redundant thread, you have somewhere to start searching for data on the subject.

Start a new one and try to keep it compressed.

I think there should be a thread for those who have completed a DIY projector project with a couple of pics and parts lists, dimensions, etc. It seems that many readers are looking for a place to jump in and start, without all the extra research.

A project like this needs some order.

Make the next thread better than this one!

Vince

Jason · 26th June 2002, 02:02 AM

Well I was going to ask Vince to open the next thread but in retrospect I think that it is probably very fitting that he closes this one, and you guys starts the next, fresh one.

Congratulations to everyone who participated and stuck with it through the thick and thin.

<a href="http://www.diyaudio.com/forums/showthread.php?&threadid=4240">A Mk II thread has already been started</a>, and I hope that it represents a fresh and positive new phase for the projector project.

An index for this thread has already been created, is being finalised, and will become part of the <a href="http://www.diyaudio.com/wiki/index.php?page=Video">Video WikiWeb</a>. Hopefully it will offer the next thread a fantastic reference from which a high quality product will result. You have my full support in the creation of whatever infrastructure is needed to help create the ultimate projector.

Much respect,

Jason.

25th June 2002, 04:23 PM	#2711
Forrest diyAudio Member Join Date: Jan 2002 Location: Scotland	Thanks One And All Hey folks... Been reading this threading continuely for just under a year now, posted a few times back in the day but ive been broke, studying and not really able to get my hands on the necessary equipment needed to start up until recently.... Just wanted to add my 2pence and say thanks everyone for posting and putting forward there ideas, I'm sure there's more than enough information here to give anyone the helping hand that they need to get going, i know it's helped me... Wherever the next thread pops up I'll be there and this time posting what i've been doing Keep up the good work, Congratulation to all who have succeeded and good luck to all those striving to succeed. Thanks everyone best regards John Forrest __________________ Current setup: IO DATA A15V LCD monitor, 400w MH retro ohp & a 250w nobo ohp with pull down projection screen & blackout cloth

25th June 2002, 04:23 PM	#2712
vdi_nenna diyAudio Member Join Date: Oct 2000 Location: PA, USA	Thanks One And All Mike, Please re-read what I wrote slowly. Everyone, I think the thread should be readable when closed, if that is possible, I don't know. If Jason says it is, then excellent. If you at least close this long, redundant thread, you have somewhere to start searching for data on the subject. Start a new one and try to keep it compressed. I think there should be a thread for those who have completed a DIY projector project with a couple of pics and parts lists, dimensions, etc. It seems that many readers are looking for a place to jump in and start, without all the extra research. A project like this needs some order. Make the next thread better than this one! Vince

New To Site?	Need Help?
Register to Participate Search Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


<a rel='nofollow' href='http://www.diyaudio.com/openx/www/delivery/ck.php?n=aa5cb2e9&cb=210511' target='_blank'><img src='http://www.diyaudio.com/openx/www/delivery/avw.php?zoneid=3&cb=210511&n=aa5cb2e9' border='0' alt='' /></a>	We're saving for a new server - help us to serve you by Donating Today and become a friend with benefits! Ads on/off / Custom Title / 2009 Tshirt / More PMs / Bigger Images / Advanced printing

26th June 2002, 02:02 AM	#2713
Jason :) diyAudio Administrator Join Date: Oct 2000 Location: Melbourne Blog Entries: 1	Well I was going to ask Vince to open the next thread but in retrospect I think that it is probably very fitting that he closes this one, and you guys starts the next, fresh one. Congratulations to everyone who participated and stuck with it through the thick and thin. <a href="http://www.diyaudio.com/forums/showthread.php?&threadid=4240">A Mk II thread has already been started</a>, and I hope that it represents a fresh and positive new phase for the projector project. An index for this thread has already been created, is being finalised, and will become part of the <a href="http://www.diyaudio.com/wiki/index.php?page=Video">Video WikiWeb</a>. Hopefully it will offer the next thread a fantastic reference from which a high quality product will result. You have my full support in the creation of whatever infrastructure is needed to help create the ultimate projector. Much respect, Jason.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)