Hello everyone,
I would like to completely bypass the "lamp error"/"lamp fails" signal for this projector.
I'm wondering if there is someone who has seen something similar to this motherboard ?
This is a NEC VT580 but you might have seen some other brands with similar design.
There is only one connector that I think 2 (two) of the pins should be connected instead of going down to the power-supply.
But I don't know which one because this connector is 15pin (please see first picture).
I attached the top and bottom pictures of the motherboard (pic-2 and 3).
Here is the URL link for all 6 pictures. Please let me know if you have problem accessing them: https://plus.google.com/photos/1174...s/6115818098222588529?authkey=CP-xs7eWnOHHtgE
Thank you everyone.
I would like to completely bypass the "lamp error"/"lamp fails" signal for this projector.
I'm wondering if there is someone who has seen something similar to this motherboard ?
This is a NEC VT580 but you might have seen some other brands with similar design.
There is only one connector that I think 2 (two) of the pins should be connected instead of going down to the power-supply.
But I don't know which one because this connector is 15pin (please see first picture).
I attached the top and bottom pictures of the motherboard (pic-2 and 3).
Here is the URL link for all 6 pictures. Please let me know if you have problem accessing them: https://plus.google.com/photos/1174...s/6115818098222588529?authkey=CP-xs7eWnOHHtgE
Thank you everyone.
