nView z350 rolling picture/bad picture

Neversaid · 21st January 2004, 08:48 AM

Hi
i've got now a nView z350 with a VGA cable + Belkin Mac Adpater..
The unit powers up without problems, shows the Z - Logo and waits for an input..
If i put my cable on it, the pciture is displayed but it looks like:
- 16 colors / low numbers of colors
- it flickers / rolls
- if i change the resultion the flickering goes better / worst

I used it with all kind of frequencies... with 1024x768 native resulotion...
Perhaps somebody could help me,

it haven't the original powersupply !!

Bernhard

Video Freak · 22nd January 2004, 04:52 AM

Well to me it sounds like you got a dead panel, Many people have had that problem I did too on one of My Nviews But I had another one so I scavenged parts, did you buy it as " working"?

Neversaid · 22nd January 2004, 08:11 AM

buy it without waranty untested, without a powersupply...

Any idea ?
I read that verbose mustafa means that the powersupply is wrong...

Greets
Bernhard

dr.gonzo · 25th January 2004, 11:48 AM

ive got a nveiw media pro and it done the same thing!
if i go into the menus and use the phase up/down facility it corrects it!
im guessing by (what i see on screen)phasing up and down i am just adjusting the size of the image. but if i go too far either way the picture can jump/bounce/roll/flicker/loose depth and basicaly look like its an off frequency channel on a t.v.

21st January 2004, 08:48 AM	#1
Neversaid diyAudio Member Join Date: May 2003 Location: near Munich	nView z350 rolling picture/bad picture Hi i've got now a nView z350 with a VGA cable + Belkin Mac Adpater.. The unit powers up without problems, shows the Z - Logo and waits for an input.. If i put my cable on it, the pciture is displayed but it looks like: - 16 colors / low numbers of colors - it flickers / rolls - if i change the resultion the flickering goes better / worst I used it with all kind of frequencies... with 1024x768 native resulotion... Perhaps somebody could help me, it haven't the original powersupply !! Bernhard __________________ http://www.virtuel-blue.de/diybeamer http://www.nView.de

22nd January 2004, 08:11 AM	#3
Neversaid diyAudio Member Join Date: May 2003 Location: near Munich	buy it without waranty untested, without a powersupply... Any idea ? I read that verbose mustafa means that the powersupply is wrong... Greets Bernhard __________________ http://www.virtuel-blue.de/diybeamer http://www.nView.de

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clear picture picture of KSS-273B	eledora	Digital Source	0	27th October 2007 02:10 PM

New To Site?	Need Help?
Register to Participate Search Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


<a rel='nofollow' href='http://www.diyaudio.com/openx/www/delivery/ck.php?n=aa5cb2e9&cb=302633' target='_blank'><img src='http://www.diyaudio.com/openx/www/delivery/avw.php?zoneid=3&cb=302633&n=aa5cb2e9' border='0' alt='' /></a>	We're saving for a new server - help us to serve you by Donating Today and become a friend with benefits! Ads on/off / Custom Title / 2009 Tshirt / More PMs / Bigger Images / Advanced printing

22nd January 2004, 04:52 AM	#2
Video Freak diyAudio Member Join Date: Mar 2003 Location: cold Cold north	Well to me it sounds like you got a dead panel, Many people have had that problem I did too on one of My Nviews But I had another one so I scavenged parts, did you buy it as " working"?

25th January 2004, 11:48 AM	#4
dr.gonzo diyAudio Member Join Date: Nov 2003 Location: england	ive got a nveiw media pro and it done the same thing! if i go into the menus and use the phase up/down facility it corrects it! im guessing by (what i see on screen)phasing up and down i am just adjusting the size of the image. but if i go too far either way the picture can jump/bounce/roll/flicker/loose depth and basicaly look like its an off frequency channel on a t.v.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)