Infocus IN116 no power
I assume it's a power supply issue? Is this power supply board close to another Infocus model that they have the same issue?
It's the IN116 model
I have the power supply out right now and with a power cable plugged in I see no voltage over the main fuse.
Where should I check first?
the stuff on the heatsink
k20a60u & fsu10a60 and the bridge rectifier D10XB60b
+ to - on the bridge rectifier I'm getting 164 V
That's from a similar projector but showing the PFC, I was told that it might be something between the mains filter caps and the PFC with something being open circuit or shorted.http://imageshack.com/a/img9/6876/x4c1.png
|All times are GMT. The time now is 08:22 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2013 DragonByte Technologies Ltd.
Copyright ©1999-2013 diyAudio