Go Back   Home > Forums > > > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Flat ribbons on small lcds
Flat ribbons on small lcds
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 11th February 2002, 06:53 AM   #1
verbalkint is offline verbalkint
diyAudio Member
Join Date: Feb 2002
Location: Indiana
Send a message via AIM to verbalkint
Question Flat ribbons on small lcds

This question is gonna show how much of a rookie I REALLY am!!! I live in a very small studio apt., so I am opting for the smaller LCD panel as a base, due to the smaller area. I started my project today and ran into a problem. I have a 2" lcd and board from a casio tv. The ribbon is 20 pins. I noticed after putting it in and out a couple times, the very tip on a few pins was missing(the part where they go from wider to thinner, the thin part is what I am referring to). Obviously, now, I get no video signal to the LCD. I can kinda wiggle it a bit, get sound and a jumpy image, but nothing stable. Basically, I was unaware that the plug for these flat ribbons has a pop up locking mechanism on them. I believe plugging it in without unlocking this, is the culprit(not to mention my lack of knowledge). I was wondering, a couple things if anyone can help. Is the ribbon repairable? If so, what is the most feasible way to approach it? It isn't totally destroyed, just a couple bad tips. Any help would be greatly appreciated. Also, say you have an lcd that has a 26 pin ribbon, or mine 20. Would two panels with the same pin numbers have the same pin configuration? As in a Casio lcd with 20 pins, and a Sony with 20 pins, could one work just as well as the other or could they have different pin assignments? So, 26 pins all the same, or 20 all the same...basically, is a pin assignment universal within lcds with the same amount of pins? So if my current lcd ribbon is not repairable, could I use another lcd with 20 pins from a different manufacturer? I can't express how much any guidance would be appreciated. I made some mistakes early on, hopefully, I will gain knowledge from them!! Also, is it possible to extend the ribbons in length? IE, and adapter plug and extra ribbon? If so, where would be a good place to look for these? Thanks in advance, and I encourage those who read this to laugh at my mistake with the pin plug deal, cos I laughed myself!! Can't do anything but laugh, and hope it is fixable! Thanks, Todd
Verbal Kint-the man with the plan!
  Reply With Quote


Flat ribbons on small lcdsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

New To Site? Need Help?

All times are GMT. The time now is 09:23 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio