|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
10th December 2012, 07:10 PM
|
#1 |
|
diyAudio Member
Join Date: Jun 2010
|
Lcd problem
Hey guys,
I just recently upgraded my diy projector with a bigger light and a new ballast however when i powered it up my lcd wouldnt turn on. I was very careful with the lvds cable and the connections on the side of the lcd. I have the pixelworks 338 controller board and a samsumg 15.4" wuxga panel. The led on the controller board (by the power button) turns on but it stays red. Before when i hit the power button it would turn to green and the lcd would fire up. I really hope i didnt fubar the lcd or controller, i have sunk enough money into upgrading the light and ballast already. (fan too) Please help! |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Fostex RD-8 with LCD problem | RIC | Digital Source | 0 | 8th August 2005 03:17 AM |
| New To Site? | Need Help? |
