diyAudio (
-   DIY Projectors (
-   -   Lcd problem (

shadowkiller 10th December 2012 07:10 PM

Lcd problem
Hey guys,

I just recently upgraded my diy projector with a bigger light and a new ballast however when i powered it up my lcd wouldnt turn on. I was very careful with the lvds cable and the connections on the side of the lcd. I have the pixelworks 338 controller board and a samsumg 15.4" wuxga panel. The led on the controller board (by the power button) turns on but it stays red. Before when i hit the power button it would turn to green and the lcd would fire up. I really hope i didnt fubar the lcd or controller, i have sunk enough money into upgrading the light and ballast already. (fan too)

Please help!

All times are GMT. The time now is 11:51 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2