Cheap HQI bulbs - $20 - Page 4

18wheeler · 14th November 2003, 09:38 PM

m00p_d0gg

do you still have some bulbs? I have located sockets. They looks compatible, and I'd like to buy one and try it out. I can paypal you right away. Thanks!

EL Nino · 19th December 2003, 07:05 PM

Hey m00p_d0gg where did you find the sockets at?
I'm having bad luck trying to find someone with them instock.

EL Nino · 20th December 2003, 06:28 AM

I mean 18wheeler where did you find the sockets at?

18wheeler · 20th December 2003, 04:42 PM

I don't know if it fits. In homedepot there are lots of flood light fixtures which use halogen lamps. The ends of those halogen lamps look very similar to the ends of RXC bulb. those fixtures are not expensive. the cheapest one is about $9. If I have a bulb I would buy one and try it on.

diylabs · 23rd December 2003, 04:58 PM

If anyone still needs RSC lamp holders, I have complete sets of them for about $8. Also I have the lamps for about $30. That's the cheepest I can get them.

aileron · 12th February 2004, 05:07 AM

I bought three bulbs awhile back, and I'm almost ready to assemble my projector. I'm planning to use the couple FC2 sockets I bought in a later project, so that doesn't bother me much.
Last time I dealt with DIYLabs I got exactly what I ordered (and a freebie), but the turnaround time was a bit on the high side.. and most of the other places I can find don't have pictures of the socket, which makes me wary.
So.. where can I get the cheapest RSC/RX7S sockets?

diylabs · 12th February 2004, 05:37 AM

I've got the bugs in my system worked out and can now better estimate the ship time for most orders. If you want an FC2 pair, then I can do that for about $9 plus shipping. They're ready to ship immediately as of 2/11/2004 (I have about 25 pairs in stock right now). I don't have any RSC, but could get some for the same price in about a week. Sorry that it took me a while to ship your order - I've unfortunately had to delay a lot of orders in the past because I had trouble keeping items in stock, but recently I've been ordering parts in larger quantities to avoid this problem and am also being more up front about whether an order will ship within a reasonably short amount of time. Thanks for your consideration, and again - I'm sorry to everyone who has had to endure a delayed shipment because I was unable to keep parts in stock. Please email me if you are still uneasy - I'll always be honest about the situation.

aileron · 14th February 2004, 06:44 AM

unless someone can post a link to somewhere selling what they know is the right socket, i'll go with diylabs i guess..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th November 2003, 09:38 PM	#31
18wheeler diyAudio Member Join Date: Jan 2003 Location: Northwest, US	m00p_d0gg do you still have some bulbs? I have located sockets. They looks compatible, and I'd like to buy one and try it out. I can paypal you right away. Thanks!

19th December 2003, 07:05 PM	#32
EL Nino diyAudio Member Join Date: Jul 2003 Location: Chicago	Hey m00p_d0gg where did you find the sockets at? I'm having bad luck trying to find someone with them instock.

20th December 2003, 06:28 AM	#33
EL Nino diyAudio Member Join Date: Jul 2003 Location: Chicago	I mean 18wheeler where did you find the sockets at?

20th December 2003, 04:42 PM	#34
18wheeler diyAudio Member Join Date: Jan 2003 Location: Northwest, US	I don't know if it fits. In homedepot there are lots of flood light fixtures which use halogen lamps. The ends of those halogen lamps look very similar to the ends of RXC bulb. those fixtures are not expensive. the cheapest one is about $9. If I have a bulb I would buy one and try it on.

23rd December 2003, 04:58 PM	#35
diylabs diyAudio Member Join Date: Jul 2003 Location: USA (Midwest)	If anyone still needs RSC lamp holders, I have complete sets of them for about $8. Also I have the lamps for about $30. That's the cheepest I can get them.

12th February 2004, 05:07 AM	#36
aileron diyAudio Member Join Date: Sep 2003 Location: NSW	I bought three bulbs awhile back, and I'm almost ready to assemble my projector. I'm planning to use the couple FC2 sockets I bought in a later project, so that doesn't bother me much. Last time I dealt with DIYLabs I got exactly what I ordered (and a freebie), but the turnaround time was a bit on the high side.. and most of the other places I can find don't have pictures of the socket, which makes me wary. So.. where can I get the cheapest RSC/RX7S sockets?

12th February 2004, 05:37 AM	#37
diylabs diyAudio Member Join Date: Jul 2003 Location: USA (Midwest)	I've got the bugs in my system worked out and can now better estimate the ship time for most orders. If you want an FC2 pair, then I can do that for about $9 plus shipping. They're ready to ship immediately as of 2/11/2004 (I have about 25 pairs in stock right now). I don't have any RSC, but could get some for the same price in about a week. Sorry that it took me a while to ship your order - I've unfortunately had to delay a lot of orders in the past because I had trouble keeping items in stock, but recently I've been ordering parts in larger quantities to avoid this problem and am also being more up front about whether an order will ship within a reasonably short amount of time. Thanks for your consideration, and again - I'm sorry to everyone who has had to endure a delayed shipment because I was unable to keep parts in stock. Please email me if you are still uneasy - I'll always be honest about the situation.

14th February 2004, 06:44 AM	#38
aileron diyAudio Member Join Date: Sep 2003 Location: NSW	unless someone can post a link to somewhere selling what they know is the right socket, i'll go with diylabs i guess..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)