Go Back   Home > Forums > > > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

make a video input to excellent old tv set
make a video input to excellent old tv set
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 19th January 2002, 11:16 PM   #1
richt is offline richt  Puerto Rico
diyAudio Member
 
Join Date: Nov 2001
Location: puerto rico
Default make a video input to excellent old tv set

hi folks

this is wierd !

i have a very old mitsubishi tv set with an excellent video tube in top shape (excellent gray balance & definition) no color wash.
tv works excellent but i want to add a video or if its possible
a s-video in for dvd.

if anyone have a transformer or isolation circuit to couple to
hot tv ground chassis ??

richt
  Reply With Quote
Old 20th January 2002, 12:19 AM   #2
vdi_nenna is offline vdi_nenna  United States
diyAudio Member
 
vdi_nenna's Avatar
 
Join Date: Oct 2000
Location: PA, USA
make a video input to excellent old tv set Send a message via Yahoo to vdi_nenna
Not the answer you're looking for, but I had a simular problem with an old RCA. Might help you or someone else.

Use a VCR co-ax to the TV. Use the video in of a VCR to connect the DVD player outs for audio and video. Usually line 1 or input on the VCR switches it. Set tv to channel 3 or 4. And...your set, excuse the pun!

Hope this helps,

Vince
  Reply With Quote
Old 20th January 2002, 01:52 AM   #3
richt is offline richt  Puerto Rico
diyAudio Member
 
Join Date: Nov 2001
Location: puerto rico
thank you

but i already have a rf modulator !!

i want to inject the video signal directly to the video processor of tv !!

richt


p.s. i you connect dvd thru vcr , macrovision activates creating
intermittent video ( copyguard)
  Reply With Quote
Old 20th January 2002, 01:59 AM   #4
vdi_nenna is offline vdi_nenna  United States
diyAudio Member
 
vdi_nenna's Avatar
 
Join Date: Oct 2000
Location: PA, USA
make a video input to excellent old tv set Send a message via Yahoo to vdi_nenna
I'm doing this on my girlfriend's tv set and VCR and, it's not a problem.

Good luck.

Vince
  Reply With Quote
Old 20th February 2002, 05:39 PM   #5
eila is offline eila
diyAudio Member
 
Join Date: Feb 2002
Location: Ontario, Canada
Default find a solution yet?

Richt, Did you find a solution yet? I mean, one that didn't involve running through a VCR? I'm facing the same challenge with my Toshiba.

Regards,
  Reply With Quote
Old 22nd February 2002, 03:31 AM   #6
Silverpike is offline Silverpike
diyAudio Member
 
Silverpike's Avatar
 
Join Date: Dec 2001
Location: San Jose, CA
Question ummmm....

Quote:
Use a VCR co-ax to the TV. Use the video in of a VCR to connect the DVD player outs for audio and video.
vdi_nenna: Are you really sure that is what you are doing? There is a major reason this is not going to work: Macrovision. Yes, those copy protection freaks are killing off fair use by giving us this crap to deal with.

Every modern VCR and DVD player are Macrovision enabled (there are a few exceptions, notably some non-US made DVD players). DVD players will output a Macrovision "sync" pulse (or some BS like that) which VCRs will deliberately ignore. This is to prevent DVD to VHS copying, and it also prevents the VCR passing the signal through to the RF output. I have never seen the connection method you describe work in practice because of this.
  Reply With Quote
Old 22nd February 2002, 05:24 AM   #7
seangoesbonk is offline seangoesbonk  Canada
diyAudio Member
 
seangoesbonk's Avatar
 
Join Date: Jan 2002
Location: Vancouver, BC, Canada
Default Re: ummmm....

Quote:
Originally posted by Silverpike

I have never seen the connection method you describe work in practice because of this.
Just a tip... My JVC HR-S3800U vcr works with this method.
Actually, using the S-Video, composite or RF to connect the vcr to the tv works. However, the macrovision kicks in when the record button is pressed.(so no taping DVDs!)
I have also tried this with a Sanyo vcr and an old RCA. The macrovision screwed up the picture in the sanyo even when not recording. The RCA worked, presumably something to do with it's age.

Also, if anybody has a schematic of a RF modulator that I can plug either composite or s-video into, I would be much obliged.
  Reply With Quote
Old 22nd February 2002, 02:31 PM   #8
Kelly McDonald is offline Kelly McDonald  Canada
diyAudio Member
 
Join Date: Nov 2001
Location: Ottawa, Ontario
The RF modulation process would counteract all of the advatages gained by using S-VHS or component. S-VHS gains a benefit since you can bypass the TV's comb filter, composite because you can bypass the comb filter and color decoder. If you RF modulate these signals you would essentially convert them into a composite signal and RF modulate it to a specific channel.

Adding a composite connector to a TV depends widely on the TV itself. I've done it on some sets where it is as simple as disconnecting an internal RCA connector from the built in tuner and plugging in a composite source (or course then you loose the tuner, but you could fairly easily build a switch to change between the two). Others are far, far more difficult. Adding an S-VHS or Component input will probably be a bit of work depending on the TV.
  Reply With Quote
Old 7th March 2002, 01:33 AM   #9
mrfeedback is offline mrfeedback  Australia
diyAudio Member
 
mrfeedback's Avatar
 
Join Date: Feb 2002
Location: Perth, Australia.
Macrvision sensitivity is due to time constant in video AGC section - vcrs are setup with short time constant, tvs with long time constant - if you have schematics you can sort it out.
Some Teac or is it Akai or Samsung used opto coupler setup for V/A line inputs.
Hope this helps.
Regards Eric.
  Reply With Quote

Reply


make a video input to excellent old tv setHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to make Audio and Video Interconnects Bthompson Everything Else 0 20th April 2003 10:13 PM


New To Site? Need Help?

All times are GMT. The time now is 12:25 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki