diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   DIY HiFi Supply (http://www.diyaudio.com/forums/diy-hifi-supply/)
-   -   Below-Cost Sale: Japanese Z11 Core SE Output Transformer Pair with Thick Alu. Covers (http://www.diyaudio.com/forums/diy-hifi-supply/202610-below-cost-sale-japanese-z11-core-se-output-transformer-pair-thick-alu-covers.html)

DIY Hifi Supply 16th December 2011 08:31 AM

Below-Cost Sale: Japanese Z11 Core SE Output Transformer Pair with Thick Alu. Covers
 
http://diyhifisupply.com/files/image...ance%20059.JPG

Too bad we cannot use them because 4ohm output is missing. If your speaker is 8ohm or 16ohm, take this opportunity to get these high end transformers below manuafacturing cost. $120 for a pair!

Check it out here: Below-Cost Sale : Japanese Z11 Core SE Output Transformer Pair with Thick Aluminum Cover | Diy HiFi Supply

OleBull 21st December 2011 06:46 PM

Japanese Z11 Core SE OPT vs. SE universal OPT
 
Hi, how does the Z11 SE OPT on sale compare with the SE Universal OPT from DIY HiFi Supply?

http://www.diyhifisupply.com/node/324

The latter will off course offer more flexibility, but what if they both are installed in a 300B SET amp?

Happy holidays!

galyons 21st December 2011 07:28 PM

I emailed some questions to DIY on Monday. Hopefully will hear back shortly. Hoping to use them on build similar to JEL 330B.
Cheers,
Geary

DIY Hifi Supply 22nd December 2011 02:15 AM

The Z11 OPT on sale is of higher quality but our supplier gave us below cost because they mistakenly missed the 4ohm and we have no use of them, but they normally cost more than this SE Universal OPT 2k2 - 7k5 (Pair) | Diy HiFi Supply. Only one pair Z11 OPT left, too many ordered them. :)

bear 22nd December 2011 04:09 AM

Brian sent you a PM on that last pair... re: shipping.
If I missed it, oh well...

_-_-bear

bear 6th February 2012 01:14 PM

Brian,

You have a PM... seem to not be able to make contact with "Simon" via email...

Not sure what exactly is going on...

...if anything

_-_-bear

DIY Hifi Supply 7th February 2012 07:12 AM

sorry lost track here after CNY. Simon left for 3 weeks during CNY and for his annual leave. We are catching up with emails. We have few Z11 OPT without lable. Need to find out the voltages then let you know.


All times are GMT. The time now is 06:10 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2