TRAM2 Remote Code for Logitech Harmony

jacklee · 5th July 2011, 02:34 AM

Hi,

Just want to let people know that I have added the remote codes for the TRAM2 into the Logitech Harmony Remote database, under manufacturer DIYHiFiSupply.

Jack

nattt · 5th July 2011, 12:48 PM

Thanks! I'll try that out and see how I get on.

nattt · 6th July 2011, 02:42 PM

I'm not seeing TRAM2 in the lists here: http://myremotesetup.com/ - how did you categorize it and can you see it there?

nattt · 4th October 2011, 04:48 PM

Solved the issue by moving to a URC remote and generic RC-5 controls.

rab28 · 10th March 2013, 10:45 AM

I just faced this issue also. I have found that, using a Logitech Harmony One URC, selecting a Marantz amplifier and entering the model that is listed as an example by the Logitech software results in working volume control (not fussed about the input selection, which does not work).

Doing the same with Philips or Rotel does not work at all.

- r.

5th July 2011, 02:34 AM	#1
jacklee diyAudio Member Join Date: Oct 2009	TRAM2 Remote Code for Logitech Harmony Hi, Just want to let people know that I have added the remote codes for the TRAM2 into the Logitech Harmony Remote database, under manufacturer DIYHiFiSupply. Jack

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LOGITECH Z-5300 Without Remote	orexio	Chip Amps	7	1st December 2012 03:40 PM
Adcom GTP-500II remote code	serraniruben	Analogue Source	0	29th October 2009 10:50 AM
Problem witht [code]blah[/code] ?	elseif	Forum Problems	1	17th August 2008 12:30 AM
Harmony of Taiwan drivers?	Spasticteapot	Multi-Way	3	10th February 2007 10:07 AM
Harmony H303A	ThSpeakerDude88	Tubes / Valves	12	10th December 2006 01:45 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

5th July 2011, 12:48 PM	#2
nattt diyAudio Member Join Date: Aug 2003 Location: Ottawa	Thanks! I'll try that out and see how I get on.

6th July 2011, 02:42 PM	#3
nattt diyAudio Member Join Date: Aug 2003 Location: Ottawa	I'm not seeing TRAM2 in the lists here: http://myremotesetup.com/ - how did you categorize it and can you see it there?

4th October 2011, 04:48 PM	#4
nattt diyAudio Member Join Date: Aug 2003 Location: Ottawa	Solved the issue by moving to a URC remote and generic RC-5 controls.

10th March 2013, 10:45 AM	#5
rab28 diyAudio Member Join Date: Jan 2010 Location: Melbourne	I just faced this issue also. I have found that, using a Logitech Harmony One URC, selecting a Marantz amplifier and entering the model that is listed as an example by the Logitech software results in working volume control (not fussed about the input selection, which does not work). Doing the same with Philips or Rotel does not work at all. - r.