are there DIY clock mods out there?

jarthel · 29th March 2007, 04:06 AM

I believe elso is selling his board. but I'm wondering what else can be build. hopefully you can buy a board

thank you.

philpoole · 29th March 2007, 01:12 PM

You could of course build one of Elso's earlier boards.
I've built three v7's and they work well.

You can also mod them, especially in the regulation stage (perhaps a seperate PSU etc).

Pars · 29th March 2007, 02:16 PM

http://www.pinkfishmedia.net/forum/s...ad.php?t=21594

limono · 30th March 2007, 03:26 PM

You can order the board from www.hagtech.com and there is a pre-order list from digi-key too. the clock board is $36 (or so ) and the parts cost about the same . I finished mine yesterday and it works without any problems .Regards

29th March 2007, 04:06 AM	#1
jarthel diyAudio Member Join Date: Jan 2002 Location: somewhere in Australia	are there DIY clock mods out there? I believe elso is selling his board. but I'm wondering what else can be build. hopefully you can buy a board thank you.

30th March 2007, 03:26 PM	#4
limono diyAudio Member Join Date: Mar 2007	Hagclock You can order the board from www.hagtech.com and there is a pre-order list from digi-key too. the clock board is $36 (or so ) and the parts cost about the same . I finished mine yesterday and it works without any problems .Regards

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mods for DCX 2496,digitalinput/clock	tojoko	Digital Line Level	2	1st August 2009 05:04 PM
Delta 1010 Mods: op-Amps, Caps, power supply, clock	hendrikxix	Digital Source	2	31st May 2008 04:48 PM
SONY SCD-XB770 Clock Mods	kevinkr	Digital Source	20	21st February 2005 02:42 PM
Mods: Digital Filter, 74xx, clock, DAC, dac/opamp psu, opamps?	DragonMaster	Digital Source	7	12th November 2004 06:07 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th March 2007, 01:12 PM	#2
philpoole diyAudio Member Join Date: Oct 2004	You could of course build one of Elso's earlier boards. I've built three v7's and they work well. You can also mod them, especially in the regulation stage (perhaps a seperate PSU etc).

29th March 2007, 02:16 PM	#3
Pars diyAudio Member Join Date: Jan 2004 Location: Chicago	http://www.pinkfishmedia.net/forum/s...ad.php?t=21594