CD-PRO project!!

[jokerthx]

Hi,

I have a cdpro2 with about 4 or 5 tda1541 on the shelf for the last 3 yrs .
A good friend who owned a high-precision machined shop call me last week and kindly offer me to built the cd player as a R and D project.

I am still work on the design and the project should start within a month.

My goal is to make the CD as simple as possible, one box with 16 bit no o/s, no output design yet, but probably passive since the preamp will have a good drive ability.

I just need a good simple PSU with the correct on/off sequence and a control board with display.

I know some kit are available but i dont want to order all over the world at different place, i want this project to be top notch and able to compete with the best.

It might be possible to built a very few extra unit, as to be confirm.

Thank's

[ozone_stink]

Hi, I'm working in collaboration with another Montrealer to make a CD-Pro2M player.

We've got a fair amount done, but would welcome the opportunity to collaborate with somebody else.

Frankly, the case design is our weakest link right now.

[jokerthx]

Hi Matt,

Thank's for your reply!

I need to confirm a few thing first with my friend just to make sure we're going in the same direction.
Since this project should be either¨cost no object¨for our own passion or with a commercial goal and all the associate constraint.
Than, i will definitly contact you to for further detail and dicuss a possible collaboration.
Our major skill is design and mechanic aspect.
My friend is a specialist in high tech telecom machined prototype so the mechanical aspect shouldn't be a problem.