Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

Need high quality prebuilt power supply for DAC
Need high quality prebuilt power supply for DAC
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 1st December 2006, 04:20 PM   #1
zhai is offline zhai  Denmark
diyAudio Member
 
Join Date: Jul 2006
Default Need high quality prebuilt power supply for DAC

I've just finished building my DDDAC, which sounds great Only problem now is that I'm using my dad's old huge 12v power supply. While it's great quality, I need a supply I can put in a case with the DAC. It must be of comparable or better quality than batteries.

needed specs: 12V, 36W. It must accept 240VAC input.

If there are any obvious DIY power supply projects lying around, that would be great too.
  Reply With Quote
Old 1st December 2006, 04:56 PM   #2
zhai is offline zhai  Denmark
diyAudio Member
 
Join Date: Jul 2006
I've just found an
SMPS supply which looks pretty much perfect. Does anyone have any experience with this?
  Reply With Quote
Old 2nd December 2006, 09:14 AM   #3
dddac is offline dddac  Germany
diyAudio Member
 
Join Date: Jul 2003
Location: Wiesbaden
Need high quality prebuilt power supply for DAC
Quote:
Originally posted by zhai
I've just found an
SMPS supply which looks pretty much perfect. Does anyone have any experience with this?

Hi Zhai,

nice to hear you like the dddac

To your question, these are switched power supplies and I have been trying a few as well (ready bought from electronics shop). Although it works fine, I did not liked the sound too much. It is not a big deal, but the higher frequencies are getting somewhat fizzy. You are loosing the natural rest in the sound stage. Of course for hat small money you can try

May be some one here has some link to any ne selling normal linear regulated well filtered DC supplies? I get this question more ofen, so woud be interested as well

doede
__________________
www.dddac.com
Happy listening and building
  Reply With Quote
Old 2nd December 2006, 10:02 AM   #4
maxlorenz is offline maxlorenz  Chile
diyAudio Member
 
maxlorenz's Avatar
 
Join Date: Oct 2003
Location: osorno , Chile
Hi Doede

On your site you posted a schematic for a PS. Did you ever tried it? It seems like a good start.

Although I'm pleased with my batteries (I have a friend that repairs motorcycles and he gives me batteries for free when they can't start the engine) sometimes one gets tired of the charging thing.

Best regards,
M

PS: BTW, moto batteries can be placed inside a DAC box
__________________
"Cascode all thy outputs".
  Reply With Quote
Old 3rd December 2006, 07:13 AM   #5
dddac is offline dddac  Germany
diyAudio Member
 
Join Date: Jul 2003
Location: Wiesbaden
Need high quality prebuilt power supply for DAC
Hi Max,

I never had the time the try it. I am 180 degrees different from John I have a busy (non audio) job and moved homes this year, so do a lot of work in the house

But as correctly stated on my site, it is a design idea. Never the less, something every DIY would be able to bring to a good end and experiment. What Zhai is looking for is a ready device and that is indeed an issue. What I found so far is all switching supplies or very cheap adapter junk (or very expensive)

You see why there is DIY
__________________
www.dddac.com
Happy listening and building
  Reply With Quote
Old 3rd December 2006, 11:25 AM   #6
georgehifi is offline georgehifi  Australia
diyAudio Member
 
georgehifi's Avatar
 
Join Date: Sep 2003
Location: Manly Australia (Jewel of the Pacific)
Send a message via MSN to georgehifi
Use a small 12vdc burgular alarm battery with a wall wart trickel charger attached and turn off the charger when listening, it's the cleanest 12vdc you'll get, forget about switch mode supplies, I'd rather feed it rusty nails, their cleaner.

Cheers George
__________________
Avatar : Production Lightspeed Attenuator
www.lightspeedattenuator.com
  Reply With Quote
Old 3rd December 2006, 12:33 PM   #7
dddac is offline dddac  Germany
diyAudio Member
 
Join Date: Jul 2003
Location: Wiesbaden
Need high quality prebuilt power supply for DAC
Quote:
Originally posted by georgehifi
Use a small 12vdc burgular alarm battery with a wall wart trickel charger attached and turn off the charger when listening, it's the cleanest 12vdc you'll get, forget about switch mode supplies, I'd rather feed it rusty nails, their cleaner.

Cheers George
Indeed, exactly what I use for the dddac

never the less, there are reasons why you do not want the battery, so "looking" for as´good afordable of the shelf supply ....
__________________
www.dddac.com
Happy listening and building
  Reply With Quote
Old 3rd December 2006, 01:47 PM   #8
jackinnj is offline jackinnj  United States
diyAudio Member
 
jackinnj's Avatar
 
Join Date: Apr 2002
Location: Llanddewi Brefi, NJ
Need high quality prebuilt power supply for DAC
If you want a nice "somewhat" clean supply consider an Acopian or Lambda --- these are often quite inexpensive in the surplus market -- it won't come close to a Jung Regulator in terms of noise and impedance, however.
  Reply With Quote
Old 4th December 2006, 09:47 AM   #9
ssmith is offline ssmith  Kenya
diyAudio Member
 
Join Date: Aug 2005
Location: Nairobi
I've so far tried 3 PSU's with my DDDac --

- 12v 40ah SLA battery
- SMPS - various models, 3A-6A, experimented with stiffener caps.
- Linear regulated with Elna SIlmic caps.

I must admit it's very hard to hear differences between them. I do slightly prefer batteries -- haven't noticed what Doede said about fizzy highs, but have noticed a slightly lower noise floor and, perhaps, a better soundstage.

There are so many variables involved, and this would make it hard for anyone to recommend a particular off-shelf model.

And again, in my system (FLAC>ASIO>DDDac> modded Audiodigit 2020 T-amp>frugel horns), the differences are subtle. It's not as if I switched to batteries and my jaw dropped or a massive veil came off my music.....

I also decided to go with batteries for practical reasons -- in India the 230v power supply fluctuates between 180-290 volts AC , meaning I'd have to invest in yet more voltage stabilisers, filters, surge suppressors...
So in my case batteries are far more simple -- and in practice I find it not too bad -- I have 2x 40ah SLA's. One battery easily runs both the DAC (24 chip version with USB input) and amp from dawn to dusk while the other one charges, and there is plenty of juice to spare for late night/early hour sessions. The two batteries and the charger cost me US$160.
  Reply With Quote
Old 5th December 2006, 12:47 PM   #10
t. is offline t.  United Kingdom
diyAudio Member
 
t.'s Avatar
 
Join Date: May 2003
Location: notts
Quote:
Originally posted by zhai
I've just found an
SMPS supply which looks pretty much perfect. Does anyone have any experience with this?
These are actually very good, I've tried one with a diy TDA1543 dac and the results was great, I added a 10k Siemans Sikoral cap on the output of the SMPS 12v out which then went to the dacs onboard regulation.
These SMPS's also work very well with the little Tripath amps
  Reply With Quote

Reply


Need high quality prebuilt power supply for DACHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Made in China,low cost,high quality,electronic components,power supply etc hang Vendor's Bazaar 1 16th September 2009 12:44 PM
High quality amplifier power supply for sale supernet Swap Meet 4 19th December 2008 10:22 AM
UCD AD180 + High Quality power supply SEIJI Swap Meet 1 10th September 2006 03:06 PM
High-quality power supply for a gainclone not needed ? Blitz Chip Amps 35 1st February 2004 09:24 PM


New To Site? Need Help?

All times are GMT. The time now is 12:31 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki