DDE V1.1, how to lower output
I'll be getting an Audio Alchemy V1.1 vintage dac & I understand that its output is much higher than the std. 2V. Can anyone advice how to mod so that the output to 2-2.5V? any other mods to enhance the sound other than the adaptor?
Voltage divider will do the trick.
The other solution is to decrease gain around analog filter stage.
I would go with the carbon film voltage divider option.
I would prefer to lower gain at the analog stage but got no schematics which resistor to change. Any ideas which specific resistors on the board to change?
|All times are GMT. The time now is 03:37 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio