Help for K.clock part

Bassivus · 1st November 2006, 08:46 AM

Forgive my lack of knowledge,

Can this be used in place of L3,4 in ELSO'S KWAKCLOCK 7:

http://uk.farnell.com/jsp/endecaSear...sp?SKU=9528458

philpoole · 1st November 2006, 09:53 AM

Hi,

The ones you suggest probably would work, but seem a bit bulky.

I used these....

http://uk.farnell.com/jsp/endecaSear...sp?SKU=1193616

They are a lot smaller, and are singular, so its easier to layout your circuit with them.

Hope this helps.

Phil

Bassivus · 1st November 2006, 09:59 AM

Quote:

Originally posted by philpoole
Hi,

The ones you suggest probably would work, but seem a bit bulky.

I used these....

http://uk.farnell.com/jsp/endecaSear...sp?SKU=1193616

They are a lot smaller, and are singular, so its easier to layout your circuit with them.

Hope this helps.

Phil

Thanks!

I have them allready, and since I have lots of space that should not be a problem. I was just wondering if its compatible since its not singular...

Ivica

1st November 2006, 08:46 AM	#1
Bassivus diyAudio Member Join Date: Aug 2004 Location: Novi Sad, Vojvodina	Help for K.clock part Forgive my lack of knowledge, Can this be used in place of L3,4 in ELSO'S KWAKCLOCK 7: http://uk.farnell.com/jsp/endecaSear...sp?SKU=9528458

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
what part can take the place of ST part VB408B completely	peterchen88	Parts	0	8th September 2007 05:45 AM
part# for spare part for CDM-1 wanted	joe	Digital Source	5	20th March 2007 07:59 AM
CS8412, PMD100, PCM63, onboard clock + [word] clock output implementation	stolbovoy	Digital Source	7	3rd December 2004 07:18 PM
Audiocom clock vs. LC Audio clock	KevinLee	Digital Source	22	26th July 2004 01:29 PM
Kwak clock versus Tent clock	rbroer	Digital Source	22	21st September 2003 01:20 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st November 2006, 09:53 AM	#2
philpoole diyAudio Member Join Date: Oct 2004	Hi, The ones you suggest probably would work, but seem a bit bulky. I used these.... http://uk.farnell.com/jsp/endecaSear...sp?SKU=1193616 They are a lot smaller, and are singular, so its easier to layout your circuit with them. Hope this helps. Phil

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)