http://www.tripath.com/downloads/TA0104A.pdf
Im very much interested in this sulution but have any one tryed building amps using the tripath ?
jc dk.
Im very much interested in this sulution but have any one tryed building amps using the tripath ?
jc dk.
tripath amps
hi.
brigding is possible (driving 8 ohms) and will give substantial headroom...
audiophile quality is a matter of taste i guess, but they are quite acceptable as full range amplifiers (i think there is room for improvements , perhaps even in the topology given)
a small heatsink is required as the fets (and the driver...) get a bit heated up, the pix on our site (or tripath site) should give you a good idea of the size.
bye km - km_cad@yahoo.com
hi.
brigding is possible (driving 8 ohms) and will give substantial headroom...
audiophile quality is a matter of taste i guess, but they are quite acceptable as full range amplifiers (i think there is room for improvements , perhaps even in the topology given)
a small heatsink is required as the fets (and the driver...) get a bit heated up, the pix on our site (or tripath site) should give you a good idea of the size.
bye km - km_cad@yahoo.com
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.