diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Source (http://www.diyaudio.com/forums/digital-source/)
-   -   Your Favorite Output Stage for TDA1541a ? (http://www.diyaudio.com/forums/digital-source/88040-your-favorite-output-stage-tda1541a.html)

riotubes 10th October 2006 05:52 PM

Your Favorite Output Stage for TDA1541a ?
 
Interested in hearing from builders who have listened to more than one output stage for tda1541a. Many have used 6dj8/ECC88; 6c45p; 7788/e810f triode wired, etc.

Right now I use a 6dj8 stage (tube-lover's v2 kit) Its pretty good, but I am wondering if there is a significant step up?

I have read very enthusiastic posts by those who built CCS anode load 6c45 or 7788/e810f. I have NOT read any posts from those who built CCS but did NOT like it, and changed. Anybody out there fit this profile?

I need moderate/low Zout and about ~2V output as I use a passive TVC feeding 1.5V sensitive 300B in DRD circuit (100K ohm). An output stage that allows use of fairly low 22-47 ohm IV resistor since tda1541 distortion increases rapidly as one approaches 100ohm.

What's your favorite and why?

riotubes 22nd October 2006 02:46 AM

Anyone with experience to share?
 
Pretty please
:smash:

HP8903B 8th January 2013 02:58 AM

bump

oshifis 8th January 2013 12:13 PM

Let me promote my tube/transformer hybrid topology:

http://www.diyaudio.com/forums/digit...ansformer.html


All times are GMT. The time now is 09:54 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2