diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Source (http://www.diyaudio.com/forums/digital-source/)
-   -   Philips CDM12.4/05 (http://www.diyaudio.com/forums/digital-source/86292-philips-cdm12-4-05-a.html)

Phasenoise 11th September 2006 06:48 AM

Philips CDM12.4/05
 
I don't suppose anyone knows where I could pick two of these up from? I'm after 2 Philips CDM12.4/05 to go in some micromega Stage/Drive players.

Has anyone successfully replaced a mech in a micromega stage player :) I have seen some 12.4's / vam1204's on some chinese sites has anyone had any experience of these units or is it best to stick to the mechs removed from other players?

Thanks any info would help at present.

Sonusthree 11th September 2006 01:32 PM

Hi Phasenoise, might this be what your looking for?
http://www.dalbani.co.uk/catalogue/p...s.php?id=11958

They are a UK firm which may well be easier?

Phasenoise 11th September 2006 10:11 PM

Thanks for that sonusthree. These should help keep my drive 3 running a few more years :)

Again thanks.

rajtaheem 11th December 2006 09:29 PM

hi, i got one of these from nikko elec. and they are genuine OEM pruducts, i first bought a lazer with mech but that idint work after 24 hours of use (onces all componants we warm) so as a last ditch atempt to revive my MM stage 6 THANK GOD!!! i am in the music again rather than the electronics....

i think a tell tale sign of refurbished pickups and mechs are:

no numbers printed on top left corner.
wrighting on the flexi cable is different.
and the supporting film is white rather than clear.
and the fact that they dont work also gives it away;)

from looking around i dont think anyone actually makes new mech. so best just get a lazer and strip your old mech down till the only thing left is the spindle motor. clean with servisol contact cleaner then reassemble with small amount of silicon spray lub and a tiny amount os silicon grease the drop the lazer in at the last minuate and put in with out distbing the lazer or getting static to it.

on the packaging that the new lazer came in it stated

new genuine part and warns of the affects of startic charge.

i also have a spare now ;) ;) as i can not find a player thats better suited to my system

MM stage 6
rega elicit amp
PMC tb1-s
seterovox firebird speaker cables
silver arrow interconnectors

tubenut 12th December 2006 12:09 PM

Do you have more details on Nikko Electric?

rajtaheem 12th December 2006 01:27 PM

try this

http://www.dalbani.co.uk/search.php

tubenut 12th December 2006 01:46 PM

Most of these resellers sell refurbs or "what appear to be poorer copies".

rajtaheem 12th December 2006 04:19 PM

im confident that these supplied by nikko are the real deal. they dont sell mechs. just new lazers they have probably got wise to the whole issue as have we i hope.....;)

tubenut 12th December 2006 05:37 PM

Link to Nikko website?

Phasenoise 13th December 2006 04:43 AM

I bought two lasers from dalbani, I haven't actually installed one yet as my current laser isn't that bad just the odd skip so probably needs a grease change. Is the spray grease the best thing to be using? I always used tubed grease but can't seem to find any at present.

The packaging for my lasers did look a bit suspect but the lasers look the real deal marked with dates from 1994, so they are much older than my actual player which was new in 1999.

I like many others love my Micromega Drive 3 and it still smokes most transports easy.


All times are GMT. The time now is 11:14 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2