Hello All,
I have failed to get this PCM1716 to work.
I use it in HW mode and it looks like the PCM signal is I2S.
Mute is high as well as reset and the DM0/DM1 pins are configured in such a way that 24-bit I2S can be accepted.
My MCLK is 24.576MHz, BCLK is 2.304 , FS is 48KHz.
Unfortunatly MCLK is not synchronous to BCLK and FS.
The Left and Right audio outputs remain at half the supply voltage.
Any one an idea ?
grtz
Simon
I have failed to get this PCM1716 to work.
I use it in HW mode and it looks like the PCM signal is I2S.
Mute is high as well as reset and the DM0/DM1 pins are configured in such a way that 24-bit I2S can be accepted.
My MCLK is 24.576MHz, BCLK is 2.304 , FS is 48KHz.
Unfortunatly MCLK is not synchronous to BCLK and FS.
The Left and Right audio outputs remain at half the supply voltage.
Any one an idea ?
grtz
Simon