Luxman D-105u Transport Identification

[es44]

For anyone who wants it i put i here: Lux D-105/107u
It's quite big, and my upload speed isn't too big anymore.
Hope it will be downloaded a lot of times

Best regards
Ebbe

[Kavouras_13]

Hello guys,

i'm new here so i can't send email or messages...i need the service manual for Luxamn D 105U...it would be grat if anyone could send it to me:

donisandreas(at)hotmail.com

thx!!
Andreas

[kevinkr]

Originally posted by es44
For anyone who wants it i put i here: Lux D-105/107u
It's quite big, and my upload speed isn't too big anymore.
Hope it will be downloaded a lot of times

Best regards
Ebbe

Originally posted by Kavouras_13
Hello guys,

i'm new here so i can't send email or messages...i need the service manual for Luxamn D 105U...it would be grat if anyone could send it to me:

donisandreas(at)hotmail.com

thx!!
Andreas

Andreas, Did you try the above link? It's still working and the manual you seek is there..

[Kavouras_13]

Hello Kevin,

first of all thx for your fast reply,

i try the link several times but it's not working ??

kind regards
Andreas

[kevinkr]

Originally posted by Kavouras_13
Hello Kevin,

first of all thx for your fast reply,

i try the link several times but it's not working ??

kind regards
Andreas

Hi Andreas,
It doesn't seem to be working, comes up as a valid link, but no file is present. I will contact ES44 directly and ask him to email you about how to get the file.

[renaudagnes]

http://www.acec13.fr/tvc/Luxman/LuxmanD107u.html

[Kavouras_13]

Good Morning from Vienna,

thank you all, i got it!!

Great forum why did'nt i found it before

have a nice weekend!!

Kind regards from Vienna
Andreas

[es44]

Hi guys. Sorry to be a little late.

I see you found it Kavouras_13, glad you did, kevinkr wrote me directly, but i haven't been around for a few days.

As long as it turns out ok, i'm glad.

Best regards
Ebbe

[Kavouras_13]

Hello again,

just finished the adjustment i found another problem, one cog of the wheel, wich i responsible for the laser unit shift, broke and some times the laser stop and jump back...does anyone know where i can get substitute?

And one more question, does anyone know the remote control code of the player?

thx, kind regards

I will try to fix the wheel know...:-)

[anatech]

Hi Kavouras_13,

just finished the adjustment i found another problem, one cog of the wheel, wich i responsible for the laser unit shift, broke and some times the laser stop and jump back...does anyone know where i can get substitute?

Another like transport. Parts are N.L.A. and have been for a long time. You may find someone with parts if you are lucky.

And one more question, does anyone know the remote control code of the player?

That will vary with the make of universal remote.

Hi fxbill,

It is a 15 minute job to swap them out and no adjustments are needed.

That is completely untrue! You are not getting top performance out of your machine. You were also lucky it worked so well.

Just because something works does not mean it's working well or properly. If your offsets are out, the unit may work but overheat the driver transistors. The only thing that will not be out of adjustment in this case will be the laser power, as it is servo controlled and normalized.

I guess I am concerned that you stated something as fact that you have very little knowledge of. This type of thing is what makes the internet dangerous. It dilutes actual information based in fact and misleads many other people.

-Chris