Reclocking I2S

[dsavitsk]

Does anyone have a suggestion for a good way to reclock an I2S signal coming into a DAC? I am thinking about using the circuit Yeo uses for the Monica DAC (http://www.diyparadise.com/asynchreclocker.html) but am open for alternatives.

Thanks,

-d

[dariusku]

Good solution(text in russian but schematics says everything)
http://www.lynxaudio.narod.ru/articl...x24/lynx24.pdf

[Elso Kwak]

Originally posted by dariusku
Good solution(text in russian but schematics says everything)
http://www.lynxaudio.narod.ru/articl...x24/lynx24.pdf

Do I need that lynx24 article?
The download is sooooooo slow (0.5kB/s)

[Elso Kwak]

Hi Asynchronous reclocking seems to work for the TDA1541 and the AD1865 but not for the TDA1543 which Kusunoki used ironically.
I have no experience with the TDA1545 though. It all depends on the clock you use.....
I made one schematic, available on request.

[dsavitsk]

Originally posted by Elso Kwak
I made one schematic, available on request.

I would appreciate seeing it very much. Thanks.

-d

[Andypairo]

Originally posted by Elso Kwak
Hi Asynchronous reclocking seems to work for the TDA1541 and the AD1865 but not for the TDA1543 which Kusunoki used ironically.
I have no experience with the TDA1545 though. It all depends on the clock you use.....
I made one schematic, available on request.

Hi,
I used Elso's ASR with TDA1543, 1545A and 1541A and must say I will use it again ;-)

Yeo's schematic is almost the same, it only uses a more compact chip with more F/F.

Cheers

Andrea

[ash_dac]

http://www.freepatentsonline.com/5329556.pdf

WS, and SPDIF reclocking only

[guglielmope]

Hello,
what is : Elso's ASR
Ciao
Guglielmo

[Elso Kwak]

ASR= Asynchronous Reclocker. Send me an email through the forum and I will reply with the schematic attached.

[guglielmope]

my address is:
guglielmope@yahoo.it

ciao
Guglielmo