superclock for Sony DVP-s9000es

fernando · 3rd March 2006, 11:06 PM

Hello
I have a Audiocom's superclock II that I would like install in my Sony s9000es cd player. First problem is that the superclock that I have is 19.9344Mhz and I believe the one in the Sony is 49.152Mhz. Can I just change the crystal in the superclock II to a 49.152 Mhz crystal or a further modification is needed?.
Does anybody knows how to hook up he superclock to the s9000es player.
Thank for your help.
Fernando

hangguy · 5th March 2006, 12:17 AM

The clock frequency used for CD in the 9000ES is 45.1584 MHz, not 49.152MHz. There are two crystals on the audio board and they get switch in and out based on if the player is playing PCM or DD/DTS. PCM playback uses the 45.1584 crystal, according to the service manual.

You should try to locate a copy of the service manual. This makes the installation a lot easier, because you know which crystal to take off and where you can connect the clock and ground. I have a copy of it but the PDF file is too large to email (42MB).

Sorry, never use the superclock before so I cannot help you with changing to freq.

Mike

3rd March 2006, 11:06 PM	#1
fernando diyAudio Member Join Date: Dec 2004 Location: Boston	superclock for Sony DVP-s9000es Hello I have a Audiocom's superclock II that I would like install in my Sony s9000es cd player. First problem is that the superclock that I have is 19.9344Mhz and I believe the one in the Sony is 49.152Mhz. Can I just change the crystal in the superclock II to a 49.152 Mhz crystal or a further modification is needed?. Does anybody knows how to hook up he superclock to the s9000es player. Thank for your help. Fernando

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sony dvp-s9000es mods	jpvnnvpj	Digital Source	0	14th July 2007 03:50 PM
Superclock 3	stvnharr	Digital Source	8	31st March 2007 11:10 PM
To superclock or not?	dublin78	Digital Source	3	10th March 2007 07:22 PM
Sony DVP-S9000ES Digital Signal Tap	wdavis009	Digital Source	0	31st December 2005 03:54 PM
CXA8042 on the Sony DVP-S9000ES	hatasa	Digital Source	11	27th March 2002 06:40 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th March 2006, 12:17 AM	#2
hangguy diyAudio Member Join Date: Feb 2004 Location: Temple City, CA	The clock frequency used for CD in the 9000ES is 45.1584 MHz, not 49.152MHz. There are two crystals on the audio board and they get switch in and out based on if the player is playing PCM or DD/DTS. PCM playback uses the 45.1584 crystal, according to the service manual. You should try to locate a copy of the service manual. This makes the installation a lot easier, because you know which crystal to take off and where you can connect the clock and ground. I have a copy of it but the PDF file is too large to email (42MB). Sorry, never use the superclock before so I cannot help you with changing to freq. Mike

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)