Digital out from a CD player that doenst have one?

crackerkorean · 18th January 2006, 02:25 AM

I have a denon DCD-1100 and would like to put a digital out on it and I am wondering if this is some what possible.

Im just getting into the whole DIY thing so if its to complicated I will have to pass for now.

wa2ise · 18th January 2006, 04:39 AM

I have a Denon DCD 590, which is the little brother to their 690. The 690 has a digital ooutput but not the 590, though it's the samecircuit board without the digital parts stuffed. Which were just a 7400 chip and a cap and a pulse transformer. Take a look inside yours for unstuffed parts near the back panel.

Jocko Homo · 18th January 2006, 05:30 AM

If the signal is there, but the parts are missing, they did you a favour. I can promise their version is lousy. The stock version is always lousy.

Jocko

velicko · 19th January 2006, 01:24 PM

I have oportunitie to bye Denon 560. It'll cost me I guess just few beers at local pub...

, so I am also interested in issue.

I couldn't find on the NET which D/A converter Denon uses for DCD-560 model, so if anyone knows it would be nice...

It would be easier to find the signal path if you have datasheet for used D/A converter?

What would be complete schematics for implementing such output?

crackerkorean · 19th January 2006, 03:22 PM

I found out the DA converter is the PCM53JP-V

Anybody have info on this?
Can I not just take the digital signal going into this and dump it to an external DAC?

rfbrw · 19th January 2006, 05:26 PM

Quote:

Originally posted by crackerkorean
I found out the DA converter is the PCM53JP-V

Anybody have info on this?

16 bit parallel input offset binary dac.

Quote:

Can I not just take the digital signal going into this and dump it to an external DAC?

I supose you could but parallel input audio dacs are not very common these days and besides, I doubt you want to run 16+ cables to your external dac

18th January 2006, 02:25 AM	#1
crackerkorean diyAudio Member Join Date: Sep 2004 Location: ATL	Digital out from a CD player that doenst have one? I have a denon DCD-1100 and would like to put a digital out on it and I am wondering if this is some what possible. Im just getting into the whole DIY thing so if its to complicated I will have to pass for now.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adding digital out to a CD player with only PCM!	Destroyer OS.	Parts	0	4th June 2006 09:51 PM
How to add digital out to old CD player?	bachiano	Digital Source	4	15th November 2005 02:35 PM
Digital out from factory car CD player	bknauss	Digital Source	3	25th January 2004 07:06 AM
Digital in on CD player	Sjef	Digital Source	4	22nd September 2003 06:24 PM
NAD 522 CD Player Digital Out Mod - HELP!	Jonathan M	Digital Source	11	18th April 2003 07:25 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

18th January 2006, 04:39 AM	#2
wa2ise diyAudio Member Join Date: Apr 2005 Location: NJ	I have a Denon DCD 590, which is the little brother to their 690. The 690 has a digital ooutput but not the 590, though it's the samecircuit board without the digital parts stuffed. Which were just a 7400 chip and a cap and a pulse transformer. Take a look inside yours for unstuffed parts near the back panel.

18th January 2006, 05:30 AM	#3
Jocko Homo Banned Join Date: Feb 2002 Location: As far from the NOSsers as possible	If the signal is there, but the parts are missing, they did you a favour. I can promise their version is lousy. The stock version is always lousy. Jocko

19th January 2006, 01:24 PM	#4
velicko diyAudio Member Join Date: Jan 2006 Location: Serbia - Niska Banja	I have oportunitie to bye Denon 560. It'll cost me I guess just few beers at local pub... , so I am also interested in issue. I couldn't find on the NET which D/A converter Denon uses for DCD-560 model, so if anyone knows it would be nice... It would be easier to find the signal path if you have datasheet for used D/A converter? What would be complete schematics for implementing such output?

19th January 2006, 03:22 PM	#5
crackerkorean diyAudio Member Join Date: Sep 2004 Location: ATL	I found out the DA converter is the PCM53JP-V Anybody have info on this? Can I not just take the digital signal going into this and dump it to an external DAC?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)