Digital out from a CD player that doenst have one?

[crackerkorean]

I have a denon DCD-1100 and would like to put a digital out on it and I am wondering if this is some what possible.

Im just getting into the whole DIY thing so if its to complicated I will have to pass for now.

 

[wa2ise]

I have a Denon DCD 590, which is the little brother to their 690. The 690 has a digital ooutput but not the 590, though it's the samecircuit board without the digital parts stuffed. Which were just a 7400 chip and a cap and a pulse transformer. Take a look inside yours for unstuffed parts near the back panel.

 

[Jocko Homo]

If the signal is there, but the parts are missing, they did you a favour. I can promise their version is lousy. The stock version is always lousy.

Jocko

 

[velicko]

I have oportunitie to bye Denon 560. It'll cost me I guess just few beers at local pub... , so I am also interested in issue.

I couldn't find on the NET which D/A converter Denon uses for DCD-560 model, so if anyone knows it would be nice...

It would be easier to find the signal path if you have datasheet for used D/A converter?

What would be complete schematics for implementing such output?

 

[crackerkorean]

I found out the DA converter is the PCM53JP-V

Anybody have info on this?
Can I not just take the digital signal going into this and dump it to an external DAC?

 

[rfbrw]

I found out the DA converter is the PCM53JP-V

Anybody have info on this?

16 bit parallel input offset binary dac.

Can I not just take the digital signal going into this and dump it to an external DAC?

I supose you could but parallel input audio dacs are not very common these days and besides, I doubt you want to run 16+ cables to your external dac