Luxman D-225 optical pick-up replacement

chicco_36 · 19th November 2005, 11:31 PM

I have one non-working Luxman D225 CD Player, which have dead laser. Can anyone help me with info about optical pick-up type on this model? Schematic will be even better.
Thanks,
Chicco

Leolabs · 20th November 2005, 01:12 AM

Can you post the picture of the pickup??

chicco_36 · 20th November 2005, 11:57 PM

I don't have camera, but i will try to find a friend who has and i will post a picture.
Anyone have info of this Luxman CDP, or i'm the only one with this player?
All the best,
Chicco

chicco_36 · 21st November 2005, 10:25 PM

Here is a pic of the laser

anatech · 21st November 2005, 10:36 PM

Hi Chico,
The part number on the laser head is SOH-AP. Make sure the cable is good (or be careful when changing the head).

Why do you think the head is bad? It's the most common misdiagnoses.

-Chris

chicco_36 · 21st November 2005, 11:41 PM

Hi Chris,
I'm not shure at all, but everiting seems to work ok, logic, motors, sensor switches...
This is Samsung head i gess, not fammiliar with it.
I didn't have schematic, so it's hard to examine everiting and to be 100% shure.
I will apriciate every help,
thanks to all!
Chicco

anatech · 21st November 2005, 11:43 PM

Hi Chicco,
What is it doing exactly? Do you have an oscilloscope?

-Chris

chicco_36 · 21st November 2005, 11:59 PM

Hi Chris,
When the disc is in, spindle motor rotates the disc and laser tries to read it without success for a couple of minutes. With empty tray there is red light from the laser head, and if disk is not inserted, “no disk” command on display shows up. So, I guess logic is ok, but laser is too weak to read the disc content properly.
Chicco
P.S.: I can borrow from a friend an old Philips 10 Mhz oscilloscope if is worth at all.

anatech · 22nd November 2005, 12:02 AM

Borrow the Philips, much better than nothing.

I will look into the archives and get back to you tomorrow.

-Chris

chicco_36 · 22nd November 2005, 12:51 AM

Thanks Chris,
you can e-mail me if you have service manual for this CDP.
One more picture ...
Chicco

19th November 2005, 11:31 PM	#1
chicco_36 diyAudio Member Join Date: Sep 2004 Location: Skopje, Macedonia	Luxman D-225 optical pick-up replacement I have one non-working Luxman D225 CD Player, which have dead laser. Can anyone help me with info about optical pick-up type on this model? Schematic will be even better. Thanks, Chicco

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Optical Pick Up for CD Player Wholesaler or Manufacturer?	tiefbassuebertr	Digital Source	15	27th April 2013 11:28 PM
Sony optical pick-up KSS 273 A	cdun	Digital Source	10	24th December 2012 11:57 PM
Marantz CD-7 optical pick-up head	Mike Chan	Digital Source	2	6th January 2008 01:43 PM
Marantz CD-7 optical pick-up head	Mike Chan	Parts	0	16th July 2007 04:17 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th November 2005, 01:12 AM	#2
Leolabs diyAudio Member Join Date: Dec 2004 Location: Bukit Mertajam	Can you post the picture of the pickup??

20th November 2005, 11:57 PM	#3
chicco_36 diyAudio Member Join Date: Sep 2004 Location: Skopje, Macedonia	I don't have camera, but i will try to find a friend who has and i will post a picture. Anyone have info of this Luxman CDP, or i'm the only one with this player? All the best, Chicco

21st November 2005, 10:36 PM	#5
anatech diyAudio Moderator Join Date: Jun 2004 Location: Georgetown, On	Hi Chico, The part number on the laser head is SOH-AP. Make sure the cable is good (or be careful when changing the head). Why do you think the head is bad? It's the most common misdiagnoses. -Chris

21st November 2005, 11:41 PM	#6
chicco_36 diyAudio Member Join Date: Sep 2004 Location: Skopje, Macedonia	Hi Chris, I'm not shure at all, but everiting seems to work ok, logic, motors, sensor switches... This is Samsung head i gess, not fammiliar with it. I didn't have schematic, so it's hard to examine everiting and to be 100% shure. I will apriciate every help, thanks to all! Chicco

21st November 2005, 11:43 PM	#7
anatech diyAudio Moderator Join Date: Jun 2004 Location: Georgetown, On	Hi Chicco, What is it doing exactly? Do you have an oscilloscope? -Chris

21st November 2005, 11:59 PM	#8
chicco_36 diyAudio Member Join Date: Sep 2004 Location: Skopje, Macedonia	Hi Chris, When the disc is in, spindle motor rotates the disc and laser tries to read it without success for a couple of minutes. With empty tray there is red light from the laser head, and if disk is not inserted, “no disk” command on display shows up. So, I guess logic is ok, but laser is too weak to read the disc content properly. Chicco P.S.: I can borrow from a friend an old Philips 10 Mhz oscilloscope if is worth at all.

22nd November 2005, 12:02 AM	#9
anatech diyAudio Moderator Join Date: Jun 2004 Location: Georgetown, On	Borrow the Philips, much better than nothing. I will look into the archives and get back to you tomorrow. -Chris