diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Source (http://www.diyaudio.com/forums/digital-source/)
-   -   MISSION PCMII analogue stage board connect? (http://www.diyaudio.com/forums/digital-source/67505-mission-pcmii-analogue-stage-board-connect.html)

Chayaphat 8th November 2005 11:13 AM

MISSION PCMII analogue stage board connect?
 
2 Attachment(s)
I come from asia(Thailand).i used cyrus

two+psx,sp. Mission 774 ,mission cyrus

pcmII.Now pcmII not play i find not see repair

it.and CDM4/11 no good.I buy Marantz CD-5L.CD-

5L it uesd CDM2/10 ,DAC 1541.I see board PCMII

and CD-5L .It coppy mission PCMII.I modify CD-

5L remove TDA1541A S1,SAA7220/B from PCMII go

to board CD-5L .It OK. work and It sound very

good.But CD-5L not analog stage in PCMII.I see

secket connect from board mission from output

opamp NE5532. it connect to board analog stage

board in Mission.I see point connect have 8 point.
is
: 1.LHDP (output opamp No.1 - NE5532)
2.LGND (Ground)
3.+ 3 v.
4.GND.
5.-3 v.
6. KILL *?*(what that)
7.RGND(Ground)
8.RHDP (output opamp No.2 -NE5532)

I connect follow but in board CD-5L .I connect

1,2,3,4,5,7,8 but I not connect 6? it? .I see

board PCMII sec 6 this connect .It how many

voltage? It connect sec6 from...?.I give you

comment circuit PCMII. or You have Circuit

diagram PCMII.I very thak you.I love Cyrus

mission PCMII my.


All times are GMT. The time now is 11:53 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2