Looking for 384fs capable SPDIF receiver

Johnix · 29th September 2005, 12:08 PM

Hi all,

I am currently looking for a high quality SPDIF receiver with masterclock output of 384fs (most of chips provide 256fs)

I have found an old Yamaha chip : YM3623b that could do the job but it may be impossible to find in stores in 2005

Any help would be appreciated....

peranders · 29th September 2005, 12:13 PM

Have you checked at www.cirrus.com ?

Jocko Homo · 29th September 2005, 03:28 PM

I have lots of them. New or used, your choice.

Jocko

Extreme_Boky · 30th September 2005, 04:57 AM

Quote:

I have found an old Yamaha chip : YM3623b

Nice receiver chip! I liked it a lot!
Reminder: it right justifies.

Extreme_Boky

vt4c · 30th September 2005, 05:30 AM

I have about 13 pcs. of new/unused YM3623B that I'm willing to part. Give me a shout if you're looking for more.

alfsch · 30th September 2005, 08:16 AM

i have about 12 ym3623 dil case, new.
if you need...

fumihiko · 30th September 2005, 12:55 PM

do you know TOSHBA TC9245 ?

Johnix · 30th September 2005, 03:30 PM

i can't find any datasheet in english

do you have a link ?

fumihiko · 1st October 2005, 12:04 AM

http://www.alldatasheet.com

Johnix · 6th October 2005, 06:51 PM

And what about BB DIR1700, 1703 etc..

it seems that these chips can be set for 384fs operation (512fs too)

29th September 2005, 12:08 PM	#1
Johnix diyAudio Member Join Date: Jul 2004 Location: Lyon (France)	Looking for 384fs capable SPDIF receiver Hi all, I am currently looking for a high quality SPDIF receiver with masterclock output of 384fs (most of chips provide 256fs) I have found an old Yamaha chip : YM3623b that could do the job but it may be impossible to find in stores in 2005 Any help would be appreciated....

29th September 2005, 12:13 PM	#2
peranders Electrons are yellow and more is better! diyAudio Member Join Date: Apr 2002 Location: Göteborg, Sweden Blog Entries: 4	Have you checked at www.cirrus.com ? __________________ /Per-Anders (my first name) or P-A as my friends call me

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Multiformat SPDIF receiver	quantran	Digital Source	3	2nd April 2007 11:29 AM
WTB: CS8413 spdif receiver	Alexandre	Swap Meet	3	19th August 2006 11:11 PM
Firewire audio out to i.link capable receiver?	Yves Smolders	Digital Source	1	24th November 2005 03:14 PM
SPDIF receiver	Darth freudius	Digital Source	1	25th August 2005 01:33 PM
SPDIF Input Receiver & MUX	JHertz	Digital Source	4	29th May 2003 03:22 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th September 2005, 03:28 PM	#3
Jocko Homo Banned Join Date: Feb 2002 Location: As far from the NOSsers as possible	I have lots of them. New or used, your choice. Jocko

30th September 2005, 05:30 AM	#5
vt4c diyAudio Member Join Date: Jan 2001 Location: Malaysia	I have about 13 pcs. of new/unused YM3623B that I'm willing to part. Give me a shout if you're looking for more.

30th September 2005, 08:16 AM	#6
alfsch diyAudio Member Join Date: Jan 2002 Location: augsburg	i have about 12 ym3623 dil case, new. if you need...

30th September 2005, 12:55 PM	#7
fumihiko diyAudio Member Join Date: Jun 2004 Location: japan	do you know TOSHBA TC9245 ?

30th September 2005, 03:30 PM	#8
Johnix diyAudio Member Join Date: Jul 2004 Location: Lyon (France)	i can't find any datasheet in english do you have a link ?

1st October 2005, 12:04 AM	#9
fumihiko diyAudio Member Join Date: Jun 2004 Location: japan	http://www.alldatasheet.com

6th October 2005, 06:51 PM	#10
Johnix diyAudio Member Join Date: Jul 2004 Location: Lyon (France)	And what about BB DIR1700, 1703 etc.. it seems that these chips can be set for 384fs operation (512fs too)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)