Teac CD-P3450SE faulty transport???

Puggie · 19th August 2005, 09:50 AM

I have a Teac CD-P3450SE with the following fault:

it powers up fine and if you track skip you can hear the laser moving. BUT it will not spin the CD, when you load the CD it is raised by the trasport off the tray and given a little 'kick' as if its starting to spin but then doesn't spin and the display just reads 'disc' (I don't have a manual but presume this means it isn't detecting the disc in the player).

any advice on what I can do?

jaycee · 19th August 2005, 12:09 PM

either the spindle motor has had it, or the laser has had it and it can't sense theres a disc in there. Does it spin slightly just once, or does it spin, move the laser, spin, move the laser, etc, and then give up ?

Puggie · 19th August 2005, 12:21 PM

tries to spin just the once when you hit play, you can track skip and hear the lazer movin but from memory it doesn't try and spin the disc again until you stop it and hit play again, it doesn't repeatedly whirr the laser and try and spin the disc then eventually give up. Any easy way do diagnose which would be at fault, I can imaging the laser being an easier swap than the spindle motor (and I've done plenty of lasers in car audio CD players).

19th August 2005, 09:50 AM	#1
Puggie diyAudio Member Join Date: Oct 2004	Teac CD-P3450SE faulty transport??? I have a Teac CD-P3450SE with the following fault: it powers up fine and if you track skip you can hear the laser moving. BUT it will not spin the CD, when you load the CD it is raised by the trasport off the tray and given a little 'kick' as if its starting to spin but then doesn't spin and the display just reads 'disc' (I don't have a manual but presume this means it isn't detecting the disc in the player). any advice on what I can do?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TEAC VRDS T1 CD Transport	hifiboy	Digital Source	79	2nd March 2012 11:22 AM
Teac P10 transport	radar	Digital Source	0	21st May 2007 06:56 AM
Teac P10 Transport, what laser?	georgehifi	Digital Source	10	18th May 2007 12:54 PM
Teac P-700 transport need help	Wilmore	Digital Source	3	28th July 2005 06:32 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th August 2005, 12:09 PM	#2
jaycee diyAudio Member Join Date: Apr 2004 Location: Norwich, UK	either the spindle motor has had it, or the laser has had it and it can't sense theres a disc in there. Does it spin slightly just once, or does it spin, move the laser, spin, move the laser, etc, and then give up ?

19th August 2005, 12:21 PM	#3
Puggie diyAudio Member Join Date: Oct 2004	tries to spin just the once when you hit play, you can track skip and hear the lazer movin but from memory it doesn't try and spin the disc again until you stop it and hit play again, it doesn't repeatedly whirr the laser and try and spin the disc then eventually give up. Any easy way do diagnose which would be at fault, I can imaging the laser being an easier swap than the spindle motor (and I've done plenty of lasers in car audio CD players).

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)