Tent Labs XO3 Clock Impessions - Page 7

Ruach · 9th March 2006, 05:08 AM

Nope. Sorry I wasn't clear enough.

I was referring to the 14-pin 74HC** (the chip which is just before the pulse transformer) that XO3 uses for the SPDIF.

georgehifi · 9th March 2006, 05:20 AM

Ruach I do'nt think it's what you think it is, I remember asking Guido about this and I did'nt get a straight answer, but I think it's more special than just a straight 74HC**** that's why he grinds the number off, or could it be reverse psychology to make us think it's some new type of buffer that nobodys caught onto yet.

Cheers George

georgehifi · 9th March 2006, 05:27 AM

BTW does anyone know what the multi turn trimpot does? and how to set it if needed?

Cheers George

Guido Tent · 9th March 2006, 08:08 AM

Quote:

Originally posted by Ruach
Hi georgehifi, good to hear that you are getting good results with your Teac transport.

Have you tried replacing the 74HC** with 74VHC**?

Hi Guido, thanks for your clarification. I will pop by my local diy parts store for the 1000uF Blackgate. The lead space for the 470uF Blackgate doesn't quite fit the solderpads on the PCB.

Hi

bigger isn't always better :-)

best

9th March 2006, 05:20 AM	#62
georgehifi diyAudio Member Join Date: Sep 2003 Location: Manly Australia (Jewel of the Pacific)	Ruach I do'nt think it's what you think it is, I remember asking Guido about this and I did'nt get a straight answer, but I think it's more special than just a straight 74HC**** that's why he grinds the number off, or could it be reverse psychology to make us think it's some new type of buffer that nobodys caught onto yet. Cheers George __________________ Avatar : Production Lightspeed Attenuator www.lightspeedattenuator.com

9th March 2006, 05:27 AM	#63
georgehifi diyAudio Member Join Date: Sep 2003 Location: Manly Australia (Jewel of the Pacific)	BTW does anyone know what the multi turn trimpot does? and how to set it if needed? Cheers George __________________ Avatar : Production Lightspeed Attenuator www.lightspeedattenuator.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Philips Cd-Pro2 player/transport w/ tent labs XO3 clock - $1000 o.b.o.	Julien_M	Swap Meet	5	24th January 2009 11:03 PM
FS:XO3 Tent labs 27mhz	Ryssen	Swap Meet	2	19th December 2008 05:21 PM
troubles ordering at tent-labs	electrosound	Digital Line Level	4	16th November 2008 08:48 PM
WTB Tent labs Tube DAC boards	Ivan Petrov	Swap Meet	1	3rd April 2008 07:55 PM
Kwak clock versus Tent clock	rbroer	Digital Source	22	21st September 2003 01:20 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th March 2006, 05:08 AM	#61
Ruach diyAudio Member Join Date: May 2003 Location: Singapore	Nope. Sorry I wasn't clear enough. I was referring to the 14-pin 74HC** (the chip which is just before the pulse transformer) that XO3 uses for the SPDIF.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)