Tent Labs XO3 Clock Impessions

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Nope. Sorry I wasn't clear enough.

I was referring to the 14-pin 74HC** (the chip which is just before the pulse transformer) that XO3 uses for the SPDIF.

tent-xo3-klok_030604.jpg
 
Ruach said:
Hi georgehifi, good to hear that you are getting good results with your Teac transport.

Have you tried replacing the 74HC** with 74VHC**?


Hi Guido, thanks for your clarification. I will pop by my local diy parts store for the 1000uF Blackgate. The lead space for the 470uF Blackgate doesn't quite fit the solderpads on the PCB.


Hi

bigger isn't always better :)

best
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.