is there a circuit for a power supply to power the differant add on clocks

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi,

Search the forums for jung regulator. You'll need around 12 V DC for the most of add-on clocks.

16V DC is max. for XO3. Try to use fast switching soft recovery diodes. Do a bit of experimenting with capacitors - types and values, and their placement(s).

Good luck,
Extreme_Boky
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.