Philips cd650 transport problem

schonning0 · 19th May 2005, 08:05 PM

Hello this is my first post so i hope i have included everything

My cd650 seems to have devoloped some serious gremlins. When the unit powers, on the transport spins up without a disc inside. with a disc in, the player will not read and the transport does not stop to eject the disc so it comes out spinning.

I have opened it up and tried to trace the fault, as near as i can tell it is between the main pcb and the pcb under the transport. When the 5 pin connector between them is disconnect the problem disappears.

Is this a problem with the transport (CDM2/10) or the board?

Any help would be really appreciated

Netlist · 19th May 2005, 08:12 PM

Try replacing capacitor with position 2109.
If you are lucky the position numbers are printed on the PCB.
If not you'll have to wait till someone can give more info.

/Hugo

schonning0 · 20th May 2005, 02:23 AM

No there are no numbers printed on the board, but thanks for the advice.

If I find a schematic I'll try it out.

electropt · 21st May 2005, 03:27 AM

Hi,

Look HERE for the CD650 schematic.

Cheers

jonbee · 28th May 2005, 04:17 PM

Hi,
I'm having the same problem with my Philips base machine. Please email me if you'd like to collaborate (including cost sharing) on this issue. Thanks, John

carlosfm · 28th May 2005, 10:16 PM

Quote:

Originally posted by schonning0
My cd650 seems to have devoloped some serious gremlins. When the unit powers, on the transport spins up without a disc inside. with a disc in, the player will not read and the transport does not stop to eject the disc so it comes out spinning.

It looks like the player is running without the clock.
The oscillator is controlled by the SAA7220 digital filter, maby it went kaput?

schonning0 · 22nd June 2005, 11:24 PM

Where can i find the SAA7220 P\B and posibly a TDA1541A so i can see if that is the problem?

chris chiang · 23rd June 2005, 05:39 AM

I got the same problem with my CD650.Do I need to take the 5 pin disconnected?or just replace the capacitor as above discribed?
Thanks

jonbee · 24th June 2005, 06:37 AM

I just received one SAA7220P/B for my unit today from:

http://www.efuns.net/diyer/

The seller is in China and the chip looks great. I will install it this weekend and see if it helps. I'll post the results in a few days.

chris chiang · 24th June 2005, 08:47 AM

After checking my 650, I found that the -2 of the 5 pin connect on the "Supply+Decoder PCB" is 0 voltage. According to the schematic,the voltage should be -10+-2 V.Could anyone tell me what components maybe damaged?
Thanks

19th May 2005, 08:05 PM	#1
schonning0 diyAudio Member Join Date: May 2005 Location: Toronto, On	Philips cd650 transport problem Hello this is my first post so i hope i have included everything My cd650 seems to have devoloped some serious gremlins. When the unit powers, on the transport spins up without a disc inside. with a disc in, the player will not read and the transport does not stop to eject the disc so it comes out spinning. I have opened it up and tried to trace the fault, as near as i can tell it is between the main pcb and the pcb under the transport. When the 5 pin connector between them is disconnect the problem disappears. Is this a problem with the transport (CDM2/10) or the board? Any help would be really appreciated

23rd June 2005, 05:39 AM	#8
chris chiang diyAudio Member Join Date: Jun 2003 Location: Taiwan	philips cd 650 I got the same problem with my CD650.Do I need to take the 5 pin disconnected?or just replace the capacitor as above discribed? Thanks

24th June 2005, 06:37 AM	#9
jonbee diyAudio Member Join Date: May 2005 Location: Seattle	SAA7220P/B source I just received one SAA7220P/B for my unit today from: http://www.efuns.net/diyer/ The seller is in China and the chip looks great. I will install it this weekend and see if it helps. I'll post the results in a few days.

24th June 2005, 08:47 AM	#10
chris chiang diyAudio Member Join Date: Jun 2003 Location: Taiwan	CD650 help After checking my 650, I found that the -2 of the 5 pin connect on the "Supply+Decoder PCB" is 0 voltage. According to the schematic,the voltage should be -10+-2 V.Could anyone tell me what components maybe damaged? Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th May 2005, 08:12 PM	#2
Netlist diyAudio Moderator Join Date: Jan 2003	Try replacing capacitor with position 2109. If you are lucky the position numbers are printed on the PCB. If not you'll have to wait till someone can give more info. /Hugo

20th May 2005, 02:23 AM	#3
schonning0 diyAudio Member Join Date: May 2005 Location: Toronto, On	No there are no numbers printed on the board, but thanks for the advice. If I find a schematic I'll try it out.

21st May 2005, 03:27 AM	#4
electropt diyAudio Member Join Date: Jun 2004 Location: Lisboa	Hi, Look HERE for the CD650 schematic. Cheers

28th May 2005, 04:17 PM	#5
jonbee diyAudio Member Join Date: May 2005 Location: Seattle	Hi, I'm having the same problem with my Philips base machine. Please email me if you'd like to collaborate (including cost sharing) on this issue. Thanks, John

22nd June 2005, 11:24 PM	#7
schonning0 diyAudio Member Join Date: May 2005 Location: Toronto, On	Where can i find the SAA7220 P\B and posibly a TDA1541A so i can see if that is the problem?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Philips CD650 mods	SimontY	Digital Source	1094	11th August 2011 07:52 AM
Philips CD650	carlosfm	Digital Source	35	16th May 2009 12:41 PM
Vecteur L4 - Philips transport problem	moonman	Digital Source	9	30th August 2008 09:00 AM
philips cd650 problem	kaulagalvis	Digital Source	1	13th July 2007 05:46 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read