Teac VRDS T1 won't play CD

movie_fan · 11th May 2005, 10:34 PM

Hi,

my Teac T1 transport doesn't play cds anymore.

When I load a cd, the tray makes a weird noise, and when I press play it does absolutely nothing.

So, any ideas where I should look at??

Thanks!

mastertech · 11th May 2005, 11:40 PM

i cant be more specific than this-first check whether the mechanism is jammed or there is a fault with it, then check if the signals of syscon are as they should be

guytou · 12th May 2005, 01:54 AM

Hi movie fan , it could be a misalignment of tray mechanism .The first is to get service manual , the alignment procedure is well explicit . check the belts tamben .

"cuidado com essa mecanica , tem um monte de afinaçoes ."

movie_fan · 12th May 2005, 07:23 AM

Ok, so anybody can send me the relevant parts of the service manual?

scraggles · 14th May 2005, 07:55 PM

A similar thing happened to mine after transporting whilst moving house.
Try taking the lid off and see if the disk spins when pressing play, mine didn't. All it needed was a gentle tap on the side of the motor and it's been ok ever since.

movie_fan · 19th May 2005, 08:37 PM

Well, it seems like some connectors were not correctly connected on the PCB, probably as the cables are tied together, they stressed them a bit.

So, the tie was loosened up a bit.

Probem solved!!

11th May 2005, 10:34 PM	#1
movie_fan diyAudio Member Join Date: Apr 2005 Location: Lisbon	Teac VRDS T1 won't play CD Hi, my Teac T1 transport doesn't play cds anymore. When I load a cd, the tray makes a weird noise, and when I press play it does absolutely nothing. So, any ideas where I should look at?? Thanks!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TEAC VRDS-10 vs VRDS 25X	Pani	Digital Source	12	3rd April 2011 04:03 AM
Teac VRDS-10 help please?	jonners	Digital Source	18	1st February 2009 09:24 PM
Help please with Teac VRDS-T1	georgehifi	Digital Source	0	14th February 2006 02:40 AM
TEAC VRDS-10 .. need help !	picodelle	Digital Source	2	7th November 2005 10:21 PM
Teac VRDS-10 vs 10-SE	Cobra2	Digital Source	0	17th December 2004 08:54 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

11th May 2005, 11:40 PM	#2
mastertech Banned Join Date: Mar 2005 Location: Australia	i cant be more specific than this-first check whether the mechanism is jammed or there is a fault with it, then check if the signals of syscon are as they should be

12th May 2005, 01:54 AM	#3
guytou diyAudio Member Join Date: Mar 2005 Location: marseille	Hi movie fan , it could be a misalignment of tray mechanism .The first is to get service manual , the alignment procedure is well explicit . check the belts tamben . "cuidado com essa mecanica , tem um monte de afinaçoes ."

12th May 2005, 07:23 AM	#4
movie_fan diyAudio Member Join Date: Apr 2005 Location: Lisbon	Ok, so anybody can send me the relevant parts of the service manual?

14th May 2005, 07:55 PM	#5
scraggles diyAudio Member Join Date: Mar 2003 Location: Hampshire	A similar thing happened to mine after transporting whilst moving house. Try taking the lid off and see if the disk spins when pressing play, mine didn't. All it needed was a gentle tap on the side of the motor and it's been ok ever since.

19th May 2005, 08:37 PM	#6
movie_fan diyAudio Member Join Date: Apr 2005 Location: Lisbon	Well, it seems like some connectors were not correctly connected on the PCB, probably as the cables are tied together, they stressed them a bit. So, the tie was loosened up a bit. Probem solved!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)