hi everybody , I have a CDP YAMAHA CDX 810 and I would move the quartz from the decoder (YM3613)to the digital filter(actually a YM3433) I was thinking in tapping the xtal with his caps on the XO/XI of 3433,and therefore feed the XI entry of 3613B with XO of 3433 .
Am I right ,at your sense ? Do i have to buffer the XO from xtal ?
I use to have an old THOMSON LAD 440 and the clock from the 3433 was not bufferized, just a serie resistor and 1nf cap through
the CXD 1167Q .what' about the faisability of this mod ? thank's for your advises .
Am I right ,at your sense ? Do i have to buffer the XO from xtal ?
I use to have an old THOMSON LAD 440 and the clock from the 3433 was not bufferized, just a serie resistor and 1nf cap through
the CXD 1167Q .what' about the faisability of this mod ? thank's for your advises .
Re: quartz moved
See here. http://www.diyaudio.com/forums/showthread.php?postid=76884#post76884
guytou said:thanks jocko ,in fact I moved the quartz on the filter and the difference is not huge . Do you know where i could get shemes of oscillators , i would build one .
See here. http://www.diyaudio.com/forums/showthread.php?postid=76884#post76884
Re: Re: quartz moved
Or here:
http://www.diyaudio.com/forums/showthread.php?postid=199928#post199928
rfbrw said:
Or here:
http://www.diyaudio.com/forums/showthread.php?postid=199928#post199928
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.