Marantz CD67-SE

aaronlubelski · 29th April 2005, 09:24 AM

My Marantz CD67-SE does not read CD. When pushing the play button, the display blinks but nothing happens.

Some ideas how to fix it?
Does anyone have a service manual with schematics to troubleshoot the problem?

thanks, Aaron

mvollb · 29th April 2005, 11:54 AM

Hello,

check if all voltages and the cd transport and laser movement are ok. Clean lens. Try to increase laser current.

This can help maybe - cd6000 is very similar

upgrades to marantz CD6000 OSE

cheers
Michael

aaronlubelski · 29th April 2005, 04:02 PM

Michael

Thanks. I have checked most of the obvious voltages and they seem to be fine. All the movements are fine as well. How do you increase the laser current?
Unafortunately the 6000 schematics is quite different from the CD67.

Additional ideas ?

Thanks in advance, Aaron

Zombie · 29th April 2005, 04:10 PM

Hello!
Do a search for the CD63 schematic, believe it's the same except the board layout...it's big, too
Cheers
Tom

aaronlubelski · 30th April 2005, 09:52 AM

Zombie

The diagram for the CD63 may help, it can not be that different than the CD67.

Please post or send me the link. My e-mail is aaronlubelski@yahoo.com

thanks in advance, Aaron

Leolabs · 30th April 2005, 04:35 PM

Try these:
-switch off the unit
-open the top cover
-spin the spindle motor to check whether it's spining action smooth or not.
-if the spindle motor is ok,gently push the lens away from the spindle motor
-switch on the unit
-the lens should travel towards the spindle motor
-after it"hit" the end,the lens should move upward and downward few times,a not very visible red light should be seen
-insert a good CD,
-check the motor would spin or not.
-if the motor start spining,check if any tiny red light shining on the bottom side of the CD(it can be on the top side too)
-some sort of hiss sound maybe heard when the unit trying to read the content of the CD

Try these steps and inform me about your result

mvollb · 2nd May 2005, 06:35 AM

Hi,

the cd67Mk2 is very similar to the CD6000 because both players are using the same servo units (Servo Driver 3x TDA7073A with Servo Controller SAA7372), the power supply is nearly identical but the cd6000 is working with two dac-units. I do not know the cd67se maybe this one is using the same stuff like the cd63 (Servo Driver 3x TCA0372 and Servo Controller TDA1301) ??? But anyway what kind of servo units are used - Power supply, dac section and the laser part are similar. The mainboards of all these players starting with CD43, CD53, CD63, CD67Mk2, CD6000 etc. are looking nearly identical but the parts are somewhat different.

Michael

29th April 2005, 09:24 AM	#1
aaronlubelski diyAudio Member Join Date: Apr 2005 Location: Israel	Marantz CD67-SE My Marantz CD67-SE does not read CD. When pushing the play button, the display blinks but nothing happens. Some ideas how to fix it? Does anyone have a service manual with schematics to troubleshoot the problem? thanks, Aaron

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Marantz CD67 - UK	Spartacus	Swap Meet	0	1st October 2008 03:47 PM
Marantz CD67 clock mod.. my experiences	ergo	Digital Source	55	9th May 2007 10:12 AM
801/802 on marantz cd67	reddish75	Digital Source	1	25th September 2006 05:57 AM
Marantz cd67 cdr problems	leolubin	Digital Source	6	22nd November 2005 09:51 PM
Right speakers for Marantz PM8000 + Marantz CD67-OSE?	betto80	Multi-Way	2	24th May 2005 03:21 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th April 2005, 11:54 AM	#2
mvollb diyAudio Member Join Date: Mar 2005 Location: Cologne	Hello, check if all voltages and the cd transport and laser movement are ok. Clean lens. Try to increase laser current. This can help maybe - cd6000 is very similar upgrades to marantz CD6000 OSE cheers Michael

29th April 2005, 04:02 PM	#3
aaronlubelski diyAudio Member Join Date: Apr 2005 Location: Israel	Michael Thanks. I have checked most of the obvious voltages and they seem to be fine. All the movements are fine as well. How do you increase the laser current? Unafortunately the 6000 schematics is quite different from the CD67. Additional ideas ? Thanks in advance, Aaron

29th April 2005, 04:10 PM	#4
Zombie diyAudio Member Join Date: Feb 2003 Location: At home	Hello! Do a search for the CD63 schematic, believe it's the same except the board layout...it's big, too Cheers Tom

30th April 2005, 09:52 AM	#5
aaronlubelski diyAudio Member Join Date: Apr 2005 Location: Israel	Zombie The diagram for the CD63 may help, it can not be that different than the CD67. Please post or send me the link. My e-mail is aaronlubelski@yahoo.com thanks in advance, Aaron

30th April 2005, 04:35 PM	#6
Leolabs diyAudio Member Join Date: Dec 2004 Location: Bukit Mertajam	Try these: -switch off the unit -open the top cover -spin the spindle motor to check whether it's spining action smooth or not. -if the spindle motor is ok,gently push the lens away from the spindle motor -switch on the unit -the lens should travel towards the spindle motor -after it"hit" the end,the lens should move upward and downward few times,a not very visible red light should be seen -insert a good CD, -check the motor would spin or not. -if the motor start spining,check if any tiny red light shining on the bottom side of the CD(it can be on the top side too) -some sort of hiss sound maybe heard when the unit trying to read the content of the CD Try these steps and inform me about your result

2nd May 2005, 06:35 AM	#7
mvollb diyAudio Member Join Date: Mar 2005 Location: Cologne	Hi, the cd67Mk2 is very similar to the CD6000 because both players are using the same servo units (Servo Driver 3x TDA7073A with Servo Controller SAA7372), the power supply is nearly identical but the cd6000 is working with two dac-units. I do not know the cd67se maybe this one is using the same stuff like the cd63 (Servo Driver 3x TCA0372 and Servo Controller TDA1301) ??? But anyway what kind of servo units are used - Power supply, dac section and the laser part are similar. The mainboards of all these players starting with CD43, CD53, CD63, CD67Mk2, CD6000 etc. are looking nearly identical but the parts are somewhat different. Michael

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)