Help Marantz CD-42 MK II died

zachi-1 · 25th April 2005, 10:54 PM

Hi,
My Marantz CD 42 died
When I put a CD it doesn't speen the CD
When I turn it on with the stop & play buttons pushed (I think this is test mode - I dont have the service manual)
I get code "P122"
Does anyone know what this code is ?
I don't have the service manual so if you have it I will glad if you can mail it to me
also I will be glad to ear any other idea that help me bring it a live

Thanks
Zachi

tubenut · 26th April 2005, 06:30 AM

Does it attempt to focus?
I have had a few Marantz CDM4 based players where one of the spindle motor wires broke of the motor terminal. Have a look at that first.

zachi-1 · 26th April 2005, 09:28 PM

Tubenut Thanks for your reply
Yes it try to focus

tubenut · 27th April 2005, 07:17 PM

If it does not spin but tries to focus there is a good chance it is just a wire on the spindle/turntable motor. Hope it is.... If not then it could be servos or PSU

(

25th April 2005, 10:54 PM	#1
zachi-1 diyAudio Member Join Date: Apr 2005 Location: israel	Help Marantz CD-42 MK II died Hi, My Marantz CD 42 died When I put a CD it doesn't speen the CD When I turn it on with the stop & play buttons pushed (I think this is test mode - I dont have the service manual) I get code "P122" Does anyone know what this code is ? I don't have the service manual so if you have it I will glad if you can mail it to me also I will be glad to ear any other idea that help me bring it a live Thanks Zachi

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Marantz pm78 died	Sarion	Solid State	2	24th April 2008 12:09 PM
My Marantz CD63SE died	Pedja	Digital Source	19	17th April 2008 09:12 PM
M DCX died, what to do?	sqlkev	Digital Line Level	3	22nd May 2006 07:03 PM
Need help--powered sub just died	mouse	Subwoofers	3	29th October 2003 02:18 PM
Has my monitor died?	meta	Parts	2	11th December 2002 06:03 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

26th April 2005, 06:30 AM	#2
tubenut diyAudio Member Join Date: Nov 2002 Location: South Africa, Jhb	Does it attempt to focus? I have had a few Marantz CDM4 based players where one of the spindle motor wires broke of the motor terminal. Have a look at that first.

26th April 2005, 09:28 PM	#3
zachi-1 diyAudio Member Join Date: Apr 2005 Location: israel	Tubenut Thanks for your reply Yes it try to focus

27th April 2005, 07:17 PM	#4
tubenut diyAudio Member Join Date: Nov 2002 Location: South Africa, Jhb	If it does not spin but tries to focus there is a good chance it is just a wire on the spindle/turntable motor. Hope it is.... If not then it could be servos or PSU (