Hi,
I need your advise. I want to replace an op-amp Njm4580 in my cd-player and I don't know which would be the best solution.
This op-amp is having a single power suply.
http://www.ampslab.com/PDF/njm4580.pdf
From Analog Devices or Burr Brown, what it will the best?
Thanks a lot
I need your advise. I want to replace an op-amp Njm4580 in my cd-player and I don't know which would be the best solution.
This op-amp is having a single power suply.
http://www.ampslab.com/PDF/njm4580.pdf
From Analog Devices or Burr Brown, what it will the best?
Thanks a lot
Hello:
Probably I know as little as you about this but I think you first have to tell us what kind of package outline is your 4580 and try to find a diagram of your output stage.
From here I suspect 4580 has different pin configuration than 2 of the most popular opamp for upgrade: AD825 and OPA627.
Hope this helps.
Mauricio
-----------------------------------------------------------------------------------
"DIY or DIE"
Probably I know as little as you about this but I think you first have to tell us what kind of package outline is your 4580 and try to find a diagram of your output stage.
From here I suspect 4580 has different pin configuration than 2 of the most popular opamp for upgrade: AD825 and OPA627.
Hope this helps.
Mauricio
-----------------------------------------------------------------------------------
"DIY or DIE"
...so you'll have to use an adaptor module to fit two opamps, like this (type 2):
http://www.referenceaudiomods.com/M...reen=CTGY&Store_Code=RAM&Category_Code=OPAMPS
I'm concerned about pin configuration but here they say that type2 is good for NJM4560 replacement and I think 4560 has same pin configuration than 4580. Am I wrong?
Good luck
Mauricio
http://www.referenceaudiomods.com/M...reen=CTGY&Store_Code=RAM&Category_Code=OPAMPS
I'm concerned about pin configuration but here they say that type2 is good for NJM4560 replacement and I think 4560 has same pin configuration than 4580. Am I wrong?
Good luck
Mauricio
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.