Phillips CDM9 Pro opening/closing gear

delapoer · 8th April 2005, 01:03 PM

My CDM9 Pro (in an Audiolab CDM) has stripped its opening/closing gear's teeth. Can anyone tell me where I can buy one of these gears or if the same gear was used in any other Phillips drive - maybe the CDM9/44?

Regards

Joe

TDA1540 · 8th April 2005, 01:41 PM

tray gear for CD-M4 and CD-M9

delapoer · 8th April 2005, 01:54 PM

That's exactly the problem, thanks. I notice a couple of posts saying that they couldn't contact mdlover - has anyone actually managed to buy one of these new gears?

Joe

jonclancy · 8th April 2005, 06:43 PM

Have a look here, Joe:

Broken CDM9 Transport

Cheers

Jon

delapoer · 11th April 2005, 09:41 AM

Yes, that's the same fault. mdlover contacted me to say that he has no gears left. Does anyone have a list of possible donor machines to get a CDM9 from?

Cheers

Joe

tubenut · 11th April 2005, 06:02 PM

Calll your nearest Philips agent with the part number mentioned in one of the threads. Tell them it is for a CD930. I have obtained some in SA via the local agent who imported them from Holland about 3 months or so ago... There could well be some available still...
I also bumped into a malaysian web site that sells them. Just can not remember who... Philips price should be less then 4 Euro. Others sell for much more...

jonclancy · 13th April 2005, 08:52 PM

Joe - to save bother and to help other DIYers, I have just ordered 10 x CDM9 toothed wheels.

I have replaced the wheels on my Arcam Alpha 6 CD and on my Delta 250 transport.

Absolutely easy-peasy.

I paid 1.99 each for them and 2.99 postage - be here in 7 working days. If you ordered 1 it would be 1.99 postage.

I'll be happy to send you one for £3.50 including P&P - First Class Post and a padded envelope. For DIYers overseas, the cost is £3.20 plus postage at cost. I need to cover the cost of the padded envelopes (and PayPal fees if people need to use that method).

I'm not out to make a profit

, just provide a service. I will be keeping some as spares, mind you!!

Let me know if you want one.

Cheers

Jon

galnat · 9th November 2005, 06:58 PM

Even my CDM9 Pro (in an Theta Data Basic) has stripped its opening/closing gear's teeth.
Please please (my english is very scarce) can anyone tell me where I can - ACTUALLY - buy one of these gears or one CDM9 Pro transport?

Many thanks

Natale

jonclancy · 11th November 2005, 07:49 PM

.. are running out. I have one left (I'm keeping two for my own use), so PM me with your address and I'll send it. I will email you my PayPal username.

Good luck!

Jon

ChrisMmm · 23rd November 2006, 07:17 PM

Hi, wonder if by any chance you stil have any gears?

Cheers,
Chris

8th April 2005, 01:03 PM	#1
delapoer diyAudio Member Join Date: May 2004 Location: UK	Phillips CDM9 Pro opening/closing gear My CDM9 Pro (in an Audiolab CDM) has stripped its opening/closing gear's teeth. Can anyone tell me where I can buy one of these gears or if the same gear was used in any other Phillips drive - maybe the CDM9/44? Regards Joe

8th April 2005, 06:43 PM	#4
jonclancy diyAudio Member Join Date: Oct 2002 Location: UK	CDM9 gear........... Have a look here, Joe: Broken CDM9 Transport Cheers Jon

11th April 2005, 09:41 AM	#5
delapoer diyAudio Member Join Date: May 2004 Location: UK	CDM9 tray gear Yes, that's the same fault. mdlover contacted me to say that he has no gears left. Does anyone have a list of possible donor machines to get a CDM9 from? Cheers Joe

13th April 2005, 08:52 PM	#7
jonclancy diyAudio Member Join Date: Oct 2002 Location: UK	Gears........ Joe - to save bother and to help other DIYers, I have just ordered 10 x CDM9 toothed wheels. I have replaced the wheels on my Arcam Alpha 6 CD and on my Delta 250 transport. Absolutely easy-peasy. I paid 1.99 each for them and 2.99 postage - be here in 7 working days. If you ordered 1 it would be 1.99 postage. I'll be happy to send you one for £3.50 including P&P - First Class Post and a padded envelope. For DIYers overseas, the cost is £3.20 plus postage at cost. I need to cover the cost of the padded envelopes (and PayPal fees if people need to use that method). I'm not out to make a profit , just provide a service. I will be keeping some as spares, mind you!! Let me know if you want one. Cheers Jon

9th November 2005, 06:58 PM	#8
galnat diyAudio Member Join Date: Jul 2004 Location: rome	Again about CDM 9 Pro breakdown Even my CDM9 Pro (in an Theta Data Basic) has stripped its opening/closing gear's teeth. Please please (my english is very scarce) can anyone tell me where I can - ACTUALLY - buy one of these gears or one CDM9 Pro transport? Many thanks Natale


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

8th April 2005, 01:41 PM	#2
TDA1540 diyAudio Member Join Date: Feb 2004 Location: Ehv	tray gear for CD-M4 and CD-M9

8th April 2005, 01:54 PM	#3
delapoer diyAudio Member Join Date: May 2004 Location: UK	That's exactly the problem, thanks. I notice a couple of posts saying that they couldn't contact mdlover - has anyone actually managed to buy one of these new gears? Joe

11th April 2005, 06:02 PM	#6
tubenut diyAudio Member Join Date: Nov 2002 Location: South Africa, Jhb	Calll your nearest Philips agent with the part number mentioned in one of the threads. Tell them it is for a CD930. I have obtained some in SA via the local agent who imported them from Holland about 3 months or so ago... There could well be some available still... I also bumped into a malaysian web site that sells them. Just can not remember who... Philips price should be less then 4 Euro. Others sell for much more...

11th November 2005, 07:49 PM	#9
jonclancy diyAudio Member Join Date: Oct 2002 Location: UK	Wheels.... .. are running out. I have one left (I'm keeping two for my own use), so PM me with your address and I'll send it. I will email you my PayPal username. Good luck! Jon

23rd November 2006, 07:17 PM	#10
ChrisMmm diyAudio Member Join Date: Jul 2005 Location: New Zealand	Hi, wonder if by any chance you stil have any gears? Cheers, Chris

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CDM9 Loading gear	WVervoorn	Swap Meet	8	6th July 2011 01:21 PM
CDM9 tray gear	epos	Swap Meet	3	24th June 2010 11:13 AM
FS: CDM9 tray loader with new gear	mdlover	Swap Meet	2	21st August 2009 10:22 AM
Phillips CDM9/44 Laser Mechanism - Sealed NOS !	Audionutz	Swap Meet	11	11th December 2008 08:17 AM
CDM9 Tray Gear	tubenut	Digital Source	3	2nd December 2003 08:58 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read