reg:audiolab CDM service manual or help with problem

dhole · 5th April 2005, 08:28 AM

Hi there people

I have a cdm that I got on the cheap. All works well. I replaced the bulbs that go with leds... that works fine. I just got to fix the aes ebu output. It dosent give me anything when I hok it up to my 8000dac. I knowit isnt the dac as I have tried with another cdm and it worked. I found a cd that had slid out of the back of the transport mech inside the case! This is what probaly damaged something. i have checked for obvious physically damaged or sloked parts but cand find anything. A service manual would be great so I could run some tests etc.

regards
dave

dhole · 7th May 2005, 10:26 AM

I got the service manual..... excellent. now lets fix this thing....

ianpengelly · 14th November 2006, 12:06 PM

I know this is a long shot in resurecting an old thread, but can I have a copy of the manual?

I have a fully working CDM and would like to eventually do some upgrades and it would be useful to have anything to hand that would help.

Also I am intereested in the LED mod, did you use green or white LEDs?

Cheers,

Ian

ianpengelly · 29th November 2006, 09:55 AM

Anything?

dhole · 29th November 2006, 01:17 PM

hello

The circuit diagrams I have are large A3 printed ciruit diagrams.Not very easy to copy or scan.... I used standard leds from maplin.... I dont remember the voltage supply to the bulbs put I calculated a resistor value and bunged in the leds as a replacement. thats all I did
dave

ianpengelly · 29th November 2006, 09:30 PM

Hi Dave,

Thanks for the info, I appreciate the scanning / copying problem, not to worry!

Ian

5th April 2005, 08:28 AM	#1
dhole diyAudio Member Join Date: Jul 2004 Location: Brighton	reg:audiolab CDM service manual or help with problem Hi there people I have a cdm that I got on the cheap. All works well. I replaced the bulbs that go with leds... that works fine. I just got to fix the aes ebu output. It dosent give me anything when I hok it up to my 8000dac. I knowit isnt the dac as I have tried with another cdm and it worked. I found a cd that had slid out of the back of the transport mech inside the case! This is what probaly damaged something. i have checked for obvious physically damaged or sloked parts but cand find anything. A service manual would be great so I could run some tests etc. regards dave

29th November 2006, 01:17 PM	#5
dhole diyAudio Member Join Date: Jul 2004 Location: Brighton	hello The circuit diagrams I have are large A3 printed ciruit diagrams.Not very easy to copy or scan.... I used standard leds from maplin.... I dont remember the voltage supply to the bulbs put I calculated a resistor value and bunged in the leds as a replacement. thats all I did dave __________________ The luminous space in the Sword of Orion...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP -> Denon POA-3000 Service Manual or DC Offset Problem	megasat16	Solid State	2	1st April 2009 11:59 AM
problem with audiolab 8000a	davidgale	Solid State	6	12th August 2008 08:34 PM
Seek help: Leader LDM-171 user manual (Service Manual)	0451ym	Parts	0	28th June 2008 04:18 PM
Service manual for D-1 DAC	LBHajdu	Pass Labs	9	11th August 2002 04:18 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

7th May 2005, 10:26 AM	#2
dhole diyAudio Member Join Date: Jul 2004 Location: Brighton	I got the service manual..... excellent. now lets fix this thing....

14th November 2006, 12:06 PM	#3
ianpengelly diyAudio Member Join Date: Oct 2006	I know this is a long shot in resurecting an old thread, but can I have a copy of the manual? I have a fully working CDM and would like to eventually do some upgrades and it would be useful to have anything to hand that would help. Also I am intereested in the LED mod, did you use green or white LEDs? Cheers, Ian

29th November 2006, 09:55 AM	#4
ianpengelly diyAudio Member Join Date: Oct 2006	Anything?

29th November 2006, 09:30 PM	#6
ianpengelly diyAudio Member Join Date: Oct 2006	Hi Dave, Thanks for the info, I appreciate the scanning / copying problem, not to worry! Ian

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)