nad c540 transport

helios999 · 2nd April 2005, 09:47 AM

i have a nad c540 waiting to be repaired, indeed his transport is broken , what about his transport ( Sanyo) ?, where can i find it ?
i hope to repair it , it has a good reputation , better than philips 604 !

thanks for help

helios999 · 4th April 2005, 08:25 AM

nobody knows which transport is used?
by which model transports to replace it?

helios999 · 17th April 2005, 10:17 AM

in this unit the laser is SF-p101 5/8

which transport uses this laser

thanks

Extreme_Boky · 17th April 2005, 11:20 AM

I think I can help here,

The mechanism your CD player has is SANYO SF-P101N.

They come in two flavours: 15PIN version and 16PIN version. (just count the number of wires you ribbon cable has!). Otherwise, they are exactly the same and quite good! They are very sensitive to static discharge and come from the factory with a solder bulb that has to be removed once the unit is installed. Antistatic wrap must be used.

They are available from everywhere for around 20-30 euros.

Extreme_Boky

helios999 · 17th April 2005, 11:52 AM

yes Extreme , but i would like to change this +all the mecanism

i don't find the enssemble

Extreme_Boky · 17th April 2005, 12:12 PM

You won’t find the ensemble...

Call NAD for loading mechanism.

helios999 · 17th April 2005, 12:23 PM

my english is poor ! ( not my english only

)

Jorge · 1st September 2005, 01:47 PM

Quote:

Originally posted by Extreme_Boky
I think I can help here,

The mechanism your CD player has is SANYO SF-P101N.

Extreme_Boky

Hello, Extreme_Boky

I have a defective spindle motor C540.
Is SF-P101N the code for the replacement part also in this case?

Thanks,

helios999 · 1st September 2005, 02:24 PM

Quote:

Call NAD for loading mechanism.

i have called Nad ,

We email you , have said they , i waiting their mail !

Jorge · 1st September 2005, 03:13 PM

My experience with NAD is that they have a vary bad international service...

2nd April 2005, 09:47 AM	#1
helios999 diyAudio Member Join Date: Sep 2004 Location: lille	nad c540 transport i have a nad c540 waiting to be repaired, indeed his transport is broken , what about his transport ( Sanyo) ?, where can i find it ? i hope to repair it , it has a good reputation , better than philips 604 ! thanks for help

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY transport w/ CDROM drive vs player as transport	dw1narso	Digital Source	6	2nd September 2011 05:15 AM
My transport seems to be ill	dsrviola	Digital Source	0	28th December 2007 06:46 AM
Need Service Manual nad C540	helios999	Digital Source	0	24th October 2007 12:45 PM
PC as a transport	SashaV	Digital Source	17	16th April 2007 10:15 AM
I2s transport, CEC??	Duck-Twacy	Digital Source	5	18th August 2003 08:31 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th April 2005, 08:25 AM	#2
helios999 diyAudio Member Join Date: Sep 2004 Location: lille	nobody knows which transport is used? by which model transports to replace it?

17th April 2005, 10:17 AM	#3
helios999 diyAudio Member Join Date: Sep 2004 Location: lille	in this unit the laser is SF-p101 5/8 which transport uses this laser thanks

17th April 2005, 11:20 AM	#4
Extreme_Boky diyAudio Member Join Date: Dec 2003 Location: Sydney	I think I can help here, The mechanism your CD player has is SANYO SF-P101N. They come in two flavours: 15PIN version and 16PIN version. (just count the number of wires you ribbon cable has!). Otherwise, they are exactly the same and quite good! They are very sensitive to static discharge and come from the factory with a solder bulb that has to be removed once the unit is installed. Antistatic wrap must be used. They are available from everywhere for around 20-30 euros. Extreme_Boky

17th April 2005, 11:52 AM	#5
helios999 diyAudio Member Join Date: Sep 2004 Location: lille	yes Extreme , but i would like to change this +all the mecanism i don't find the enssemble

17th April 2005, 12:12 PM	#6
Extreme_Boky diyAudio Member Join Date: Dec 2003 Location: Sydney	You won’t find the ensemble... Call NAD for loading mechanism.

17th April 2005, 12:23 PM	#7
helios999 diyAudio Member Join Date: Sep 2004 Location: lille	my english is poor ! ( not my english only )

1st September 2005, 03:13 PM	#10
Jorge diyAudio Member Join Date: Apr 2001 Location: Brazil	My experience with NAD is that they have a vary bad international service...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)