Marantz CD63 & CD67 mods list - Page 1365 - diyAudio
Go Back   Home > Forums > Source & Line > Digital Source

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 4th December 2009, 05:35 PM   #13641
grofus is offline grofus  England
diyAudio Member
 
Join Date: Nov 2009
Location: Stevenage
Quote:
Originally Posted by 6h5c View Post
Her names are Mara Elise , born December 1st, 13:34.

I'm a happy man!!
Congrats, all the best.
P.S Sleep when she does LOL
  Reply With Quote
Old 4th December 2009, 06:06 PM   #13642
6h5c is offline 6h5c  Netherlands
One Seriously Addicted to Audio and Electronics
diyAudio Member
 
6h5c's Avatar
 
Join Date: Apr 2004
Location: Heerhugowaard
Quote:
Originally Posted by Malefoda View Post
That's your greatest success Ray! =) So cute!
Yes, I think she will probably exploit that when she's older

Quote:
Originally Posted by rowemeister View Post
Congratulations Ray

December will not be cheap from now on

P.S Simon already has a pink iron

Brent
Now, now, behave in front of a lady
Thanks Brent. All hope for new results on your C2 clock is now gone, as i'm free from work 'till the 4th of januari
You may blame the little one

Quote:
Originally Posted by Glenn2 View Post
Bottle-fed I hope? (as a valve/tube man...
Judging by the satisfied look on the face of my daughter, my wife's breasts taste very good, so that's minus one point for me. But just wait when I get her to solder her first resistor...

Quote:
Originally Posted by grofus View Post
Congrats, all the best.
P.S Sleep when she does LOL
Thanks, the nights are broken (well, it's only been three so far...) but she's very sweet and quiet after her nightly meals , so luckily we get a few hours sleep in between!

Regards,

Ray
__________________
Gonna buy my little girl a pink soldering-iron
The new DOS-CFP board is out!
  Reply With Quote
Old 4th December 2009, 06:24 PM   #13643
diyAudio Member
 
Join Date: Oct 2009
Location: Brunei
I see some of you have 20+ regs in the cd63. Since the biggest improvement on mine yet was replacing the 12v+/- rails (analog section) with lm317/337's, I am looking to for other regulator-related opportunities.

Where did you put them?
  Reply With Quote
Old 4th December 2009, 06:26 PM   #13644
diyAudio Member
 
Malefoda's Avatar
 
Join Date: Jun 2006
Send a message via MSN to Malefoda
Check the latest post of Glenn, here you fit 7808 and 7908.
__________________
QED T260, Thorens TD-318, Marantz CD-43, TK2050, JBL 4313B & MJK's OB: music!
  Reply With Quote
Old 4th December 2009, 09:04 PM   #13645
grofus is offline grofus  England
diyAudio Member
 
Join Date: Nov 2009
Location: Stevenage
Quote:
Originally Posted by Glenn2 View Post
Bottle-fed I hope? (as a valve/tube man...)

Regards to the track re-routing;

1) Remove U234, U161 and U237 shown in red to isolate the drivers from the raw supplies.
2) Insert -ve reg at U234 (use holes as input and output)
3) Insert +ve reg at either U161 or U237 (use holes as input and output
4) Connect blue wire as shown (you can use any colour )

Simples.
Do you need to run a wire to ground from the ground pins also?
  Reply With Quote
Old 4th December 2009, 09:54 PM   #13646
Thomo is offline Thomo  United Kingdom
diyAudio Member
 
Thomo's Avatar
 
Join Date: Nov 2006
Congratulations on your new addition to the family Ray.

Lee.
  Reply With Quote
Old 5th December 2009, 05:20 AM   #13647
diyAudio Member
 
Join Date: Jul 2003
Location: wyoming
Quote:
Originally Posted by 6h5c View Post
Hi guys, how are things over here?

Been away for a while for more important matters. Here's the result:
Congratulations Ray.
All the Best.
Pink soldering iron for first birthday is likely a sure thing.

Steve
  Reply With Quote
Old 5th December 2009, 08:16 AM   #13648
6h5c is offline 6h5c  Netherlands
One Seriously Addicted to Audio and Electronics
diyAudio Member
 
6h5c's Avatar
 
Join Date: Apr 2004
Location: Heerhugowaard
Quote:
Originally Posted by Thomo View Post
Congratulations on your new addition to the family Ray.

Lee.
Quote:
Originally Posted by stvnharr View Post
Congratulations Ray.
All the Best.
Pink soldering iron for first birthday is likely a sure thing.

Steve
Thanks for your kind words guys. She's a lively little lady, we found that out last night
If it has any more of my character, we're in for quite a party!

Ray
__________________
Gonna buy my little girl a pink soldering-iron
The new DOS-CFP board is out!
  Reply With Quote
Old 5th December 2009, 10:43 AM   #13649
SimontY is offline SimontY  United Kingdom
diyAudio Member
 
SimontY's Avatar
 
Join Date: May 2003
Location: Sheffield, North England
Send a message via MSN to SimontY
Default HF regulator

Hi,

Here's a pic showing where to insert a regulator for the HF amp. R505 (100R) comes out and reg goes in. C504 is worth upgrading too, I used an os-con SEPC as Lee recommended to me. This mod seems to improve all areas just a little bit, but it's probably not the biggest one, more a finishing touch.

The pic also shows the three decoder regs I put in this player (Steve's). It's easier to do just two regs (R508 - digital pins and R511 - analogue pin), 3 was a little bit faffy and probably gains very little! Even putting lowly 7805 regs on the decoder makes a very noticeable improvement - a must for anyone handy with a soldering iron.

Simon
Attached Images
File Type: jpg PICT2505-1024.jpg (183.0 KB, 125 views)

Last edited by SimontY; 5th December 2009 at 10:51 AM.
  Reply With Quote
Old 5th December 2009, 11:16 AM   #13650
diyAudio Member
 
Join Date: Mar 2009
High all yes simon these last mods have made the player great realy nice depth of image and smoother all round sound
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



New To Site? Need Help?

All times are GMT. The time now is 02:07 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2