Marantz CD63 & CD67 mods list - Page 1008 - diyAudio
Go Back   Home > Forums > Source & Line > Digital Source

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 3rd June 2008, 04:58 PM   #10071
SimontY is offline SimontY  United Kingdom
diyAudio Member
 
SimontY's Avatar
 
Join Date: May 2003
Location: Sheffield, North England
Send a message via MSN to SimontY
Quote:
Originally posted by RCruz
Should I use Oscon on +5v dac digital ?
I normally only recommend things I've personally tried, but it sounds like a good idea to try!

Simon
  Reply With Quote
Old 3rd June 2008, 05:58 PM   #10072
Thomo is offline Thomo  United Kingdom
diyAudio Member
 
Thomo's Avatar
 
Join Date: Nov 2006
I have used Oscons on the dac digital before and the were very good. I also used Rubycon ZA and these gave a similar sound, very smooth with great tonal detail. But my favourites are defo BG Nx Hi-Q's, these seem to have all the detail of the ZA's but with more of a "live" sound.

Lee.
__________________
/\/\/\/\/\/\/\/
  Reply With Quote
Old 3rd June 2008, 06:15 PM   #10073
RCruz is offline RCruz  Switzerland
diyAudio Member
 
RCruz's Avatar
 
Join Date: Sep 2006
Location: Wallis
Blog Entries: 1
Quote:
Originally posted by Thomo
I have used Oscons on the dac digital before and the were very good. I also used Rubycon ZA and these gave a similar sound, very smooth with great tonal detail. But my favourites are defo BG Nx Hi-Q's, these seem to have all the detail of the ZA's but with more of a "live" sound.

Do you mean 47uF 6.3v Nx Hi-Q BG ?
__________________
RC
  Reply With Quote
Old 3rd June 2008, 06:16 PM   #10074
diyAudio Member
 
Fidelity Audio's Avatar
 
Join Date: Dec 2005
Location: Doncaster England
Ricardo

Are you sure you have lost your BIG BASS or has (which I find with better modded players) the overall balance is better and appears to have less bass but infact it is still there. Also run it for a good week to settle in.

Brent
  Reply With Quote
Old 3rd June 2008, 06:20 PM   #10075
RCruz is offline RCruz  Switzerland
diyAudio Member
 
RCruz's Avatar
 
Join Date: Sep 2006
Location: Wallis
Blog Entries: 1
Quote:
Originally posted by rowemeister
Ricardo

Are you sure you have lost your BIG BASS or has (which I find with better modded players) the overall balance is better and appears to have less bass. Also run it for a good week to settle in.

Hi Brent

I believe you are right.... It needs more time to settle.

I hear the same Bass but also hear more mid level info I missed before.

Now is the time for the clock.

I Would prefer two clocks (dac for sounstage and timing + servo for improved detail) but must be cost conscious.

So I need your oppinion:

Does the combination Dac Clock + Divider give good results or should I wait and save more €€€ ?

I would like to use one of your PSU.

Can I use only one psu to feed the clock directly or must I use a Spower also (stupid question but in his site Lee informs that these psu can be used to feed the Spower ?!)

Can I use only one psu for the clock and divider ?

If I choose two clocks, can I use only one of your psu´s ?

Regards

Ricardo
__________________
RC
  Reply With Quote
Old 3rd June 2008, 06:27 PM   #10076
diyAudio Member
 
Fidelity Audio's Avatar
 
Join Date: Dec 2005
Location: Doncaster England
Ricardo

I won't get the email until tomorrow at work.

Brent
  Reply With Quote
Old 3rd June 2008, 06:54 PM   #10077
RCruz is offline RCruz  Switzerland
diyAudio Member
 
RCruz's Avatar
 
Join Date: Sep 2006
Location: Wallis
Blog Entries: 1
Never mind.

I asked the same question on the previous post.

1 PSU2 for both clocks?
__________________
RC
  Reply With Quote
Old 3rd June 2008, 07:35 PM   #10078
RCruz is offline RCruz  Switzerland
diyAudio Member
 
RCruz's Avatar
 
Join Date: Sep 2006
Location: Wallis
Blog Entries: 1

Hope I did not mess up...
__________________
RC
  Reply With Quote
Old 4th June 2008, 07:20 AM   #10079
diyAudio Member
 
Fidelity Audio's Avatar
 
Join Date: Dec 2005
Location: Doncaster England
Quote:
Originally posted by RCruz
Never mind.

I asked the same question on the previous post.

1 PSU2 for both clocks?
A shared psu for both clocks is better than one on psu and the other running off the main pcb supply. Both clocks are isolated from the main pcb this way.

Brent
  Reply With Quote
Old 4th June 2008, 07:22 AM   #10080
diyAudio Member
 
Fidelity Audio's Avatar
 
Join Date: Dec 2005
Location: Doncaster England
Quote:
Originally posted by RCruz

Hope I did not mess up...
No email this morning!!

Brent
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



New To Site? Need Help?

All times are GMT. The time now is 06:09 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2