|Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|28th February 2005, 12:48 PM||#1|
Join Date: Jan 2003
Location: UK (south west)
aiwa xc005 - new laser. adjustments ?
Hi, I just replaced the laser module on an aiwa xc005.
(A kss150a module was replaced with a kss210b)
It seems to have cured the skipping but it is now a bit intermittent when play is pressed right after a disk is inserted.
Once it has started playing there are no obvious faults. Tracks can then be selected without any problems.
Does someone recognise this fault ?
Is there some adjustment I should make after fitting a new laser (I have 'scope / meters etc) ?
I did have a trawl on the web but not much info was forthcoming.
The pots on the main board are helpfully labelled so some generic advice would be helpful
thanks in advance, dave
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Acoustic 160 adjustments||llwhtt||Solid State||0||29th April 2009 12:55 AM|
|X-5 bias adjustments||ROLIKOV||Pass Labs||3||11th December 2008 10:49 PM|
|Fender Adjustments||JDeV||Instruments and Amps||6||7th April 2006 09:17 PM|
|bias adjustments||raveenvijendren||Solid State||8||11th November 2005 01:17 PM|
|trim pot adjustments||walters9515||Instruments and Amps||0||26th April 2005 10:28 PM|
|New To Site?||Need Help?|