Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

aiwa xc005 - new laser. adjustments ?
aiwa xc005 - new laser. adjustments ?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 28th February 2005, 11:48 AM   #1
DRC is offline DRC  United Kingdom
diyAudio Member
DRC's Avatar
Join Date: Jan 2003
Location: UK (south west)
Default aiwa xc005 - new laser. adjustments ?

Hi, I just replaced the laser module on an aiwa xc005.
(A kss150a module was replaced with a kss210b)

It seems to have cured the skipping but it is now a bit intermittent when play is pressed right after a disk is inserted.

Once it has started playing there are no obvious faults. Tracks can then be selected without any problems.

Does someone recognise this fault ?
Is there some adjustment I should make after fitting a new laser (I have 'scope / meters etc) ?

I did have a trawl on the web but not much info was forthcoming.
The pots on the main board are helpfully labelled so some generic advice would be helpful

thanks in advance, dave
  Reply With Quote


aiwa xc005 - new laser. adjustments ?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Acoustic 160 adjustments llwhtt Solid State 0 28th April 2009 11:55 PM
X-5 bias adjustments ROLIKOV Pass Labs 3 11th December 2008 09:49 PM
Fender Adjustments JDeV Instruments and Amps 6 7th April 2006 08:17 PM
bias adjustments raveenvijendren Solid State 8 11th November 2005 12:17 PM
trim pot adjustments walters9515 Instruments and Amps 0 26th April 2005 09:28 PM

New To Site? Need Help?

All times are GMT. The time now is 08:59 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio