LEDS - Another Use! - diyAudio
Go Back   Home > Forums > Source & Line > Digital Source

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 5th August 2002, 03:07 AM   #1
diyAudio Member
 
Join Date: Aug 2002
Location: LA
Default LEDS - Another Use!

Well I was trolling the forums when I ran into a post describing LEDS that www.luxeon.com sells. Then I checked out there product line and found small light "emitters" which flux of up to 120 lumens (5-watts). They are small lights that are said to fit into small places. I wanted to use couple of these and stick them inside my GameBoy Advance and use them as a backlight. I am not too sure on which one of there lights to purchase :/ can someone give me a little help?

GameBoy Advance would look kinda, as you can see this person installed some lights under the LCD screen:
<img src="http://www.brainclone.com/ebay/gba_light.jpg" border="0" width="588" height="358">
__________________
--this space for rent--
  Reply With Quote
Old 5th August 2002, 01:53 PM   #2
diyAudio Member
 
MRehorst's Avatar
 
Join Date: May 2002
You can stick them behind your gameboy, but you'd better get a BIG battery pack. Check the data sheet on the parts at the Luxeon site. 5W means a ton of current. Think about it.

MR
  Reply With Quote
Old 20th August 2002, 01:03 PM   #3
alvaius is offline alvaius  Canada
diyAudio Member
 
Join Date: Feb 2002
Location: Toronto
Yes, the 1 watt versions would be far more applicable, but for a small backlight like what you have, a couple of Agilent, etc. 5mm whites would be cheaper and just as bright. You will probably want to look into a light pipe [Lumitex, etc.] to give an even light spread.

White LEDS would be easiest.

With a 1w or 5w LED, comes a lot of heat that needs to be disappated. The Lumiled is typically on an aluminum substrate to dissipate the heat.

Great parts, but not necessarily for what you are doing. If you want to buy some, www.FutureElectronics.com are the exclusive distributors. You are looking in the $5-10 range for a 1 watt unless you want to buy a whole lot of them. It may seem expensive, but they are 10 times as luminous as standard LEDS and the whites maintain their output far longer.

Alvaius
  Reply With Quote
Old 18th December 2002, 10:26 PM   #4
diyAudio Member
 
Join Date: Nov 2002
Location: Massachusetts
Send a message via AIM to verbose mustafa
Do a search an afterburner... It is a light you install on your gameboy...
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Trade my blue LEDs for White LEDs CaliforniaBob Swap Meet 7 26th March 2004 07:28 AM
WTT: Blue LEDs for Red &amp; Red/Green LEDs CaliforniaBob Swap Meet 2 9th June 2003 02:58 PM
LEDs Tomo Solid State 4 29th September 2002 09:34 PM


New To Site? Need Help?

All times are GMT. The time now is 11:23 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2