Onkyo CD DX706

Håkan · 5th January 2005, 09:36 AM

Hi !
Read error on CD onkyo DX 706.
When it was new it was "superb".
Now the out relay clicks on and off extremely often, when a new cd is inserted.

Beside the big SONY IC to the left there is a trim pot that says gain (actually 2 trim pots)
when turning this a little bit clockwise (19 hours to 21) it works again..
But what gain !!! Laser output or ampl..... ??

Where is the service manual to obtain and read about this..*.pdf
Also the mod for this CD-player is of intrest, at other subject in this area !

Lens is looking 100 % new not a mark on it .

Nicke · 5th January 2005, 04:13 PM

I dropped you an email about the manual.
For modifications start here:
http://www.diyaudio.com/forums/showt...5821#post45821
and
http://www.diyaudio.com/forums/showt...350#post115350

Nicke

Jennice · 6th January 2005, 09:34 AM

Hi,

Is it possible for me to get a copy of the service manual also?

Jennice

David Nessim · 20th March 2005, 10:42 PM

Hi to all,

I have a heavily modified DX 706. I was experiencing more and more read problems, until I got tired and oiled the spindle motor. Use a VERY light oil, say like for a fine sowing machine, and use very little. There is a hole at the bottom of the motor, so put a minor drop there to get into the bottom bushing. Results? Mirraculuos!

David

LifeIsMusic · 14th July 2005, 11:14 PM

I have also same problems with laser. And now the cd don´t rotate at all, what might be the broblem? Maybe it possible to replace a laser or some par of the mechanism.
Looking for service-manual also

thanks

sinus · 23rd January 2006, 05:55 PM

Hi, the outputrelais of my DX 706 also clicked all the time around 3 - 10 minutes after turn on. I found out what the problem is (in my case)...anybody interested about the info?
Chris

sinus · 23rd January 2006, 05:59 PM

e.g.: if anybody have the service manual on his computer: i am acceptor

Chris

Jennice · 24th January 2006, 10:59 AM

Quote:

Originally posted by David Nessim
Hi to all,

I have a heavily modified DX 706. I was experiencing more and more read problems, until I got tired and oiled the spindle motor. Use a VERY light oil, say like for a fine sowing machine, and use very little. There is a hole at the bottom of the motor, so put a minor drop there to get into the bottom bushing. Results? Mirraculuos!

David

Hi David,

You say at the bottom. did you take out the motor from the player to access it (the hole), or how do you access it?

Jennice

mlloyd1 · 26th January 2006, 05:50 AM

since i have a DX-706, i am interested. what was the problem?

mlloyd1

Quote:

Originally posted by sinus
Hi, the outputrelais of my DX 706 also clicked all the time around 3 - 10 minutes after turn on. I found out what the problem is (in my case)...anybody interested about the info?
Chris

Jennice · 26th January 2006, 08:26 AM

yes.. what caused the clicking?

5th January 2005, 09:36 AM	#1
Håkan diyAudio Member Join Date: Jan 2005 Location: Southern sweden	Onkyo CD DX706 Hi ! Read error on CD onkyo DX 706. When it was new it was "superb". Now the out relay clicks on and off extremely often, when a new cd is inserted. Beside the big SONY IC to the left there is a trim pot that says gain (actually 2 trim pots) when turning this a little bit clockwise (19 hours to 21) it works again.. But what gain !!! Laser output or ampl..... ?? Where is the service manual to obtain and read about this..*.pdf Also the mod for this CD-player is of intrest, at other subject in this area ! Lens is looking 100 % new not a mark on it .

6th January 2005, 09:34 AM	#3
Jennice diyAudio Member Join Date: Jun 2003 Location: Planet Earth	Hi, Is it possible for me to get a copy of the service manual also? Jennice __________________ I get paid to break stuff. My g/f gets paid to play with children. Life is good.

20th March 2005, 10:42 PM	#4
David Nessim diyAudio Member Join Date: Mar 2005 Location: Nahariya	Spindle motor Hi to all, I have a heavily modified DX 706. I was experiencing more and more read problems, until I got tired and oiled the spindle motor. Use a VERY light oil, say like for a fine sowing machine, and use very little. There is a hole at the bottom of the motor, so put a minor drop there to get into the bottom bushing. Results? Mirraculuos! David

23rd January 2006, 05:55 PM	#6
sinus diyAudio Member Join Date: Nov 2003 Location: Paris	Hi, the outputrelais of my DX 706 also clicked all the time around 3 - 10 minutes after turn on. I found out what the problem is (in my case)...anybody interested about the info? Chris __________________ regards Chris

23rd January 2006, 05:59 PM	#7
sinus diyAudio Member Join Date: Nov 2003 Location: Paris	e.g.: if anybody have the service manual on his computer: i am acceptor Chris __________________ regards Chris


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th January 2005, 04:13 PM	#2
Nicke diyAudio Member Join Date: Jun 2001 Location: Sweden	I dropped you an email about the manual. For modifications start here: http://www.diyaudio.com/forums/showt...5821#post45821 and http://www.diyaudio.com/forums/showt...350#post115350 Nicke

14th July 2005, 11:14 PM	#5
LifeIsMusic diyAudio Member Join Date: Dec 2004 Location: Hamburg	I have also same problems with laser. And now the cd don´t rotate at all, what might be the broblem? Maybe it possible to replace a laser or some par of the mechanism. Looking for service-manual also thanks

26th January 2006, 08:26 AM	#10
Jennice diyAudio Member Join Date: Jun 2003 Location: Planet Earth	yes.. what caused the clicking? __________________ I get paid to break stuff. My g/f gets paid to play with children. Life is good.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cd onkyo integra dx706	pecotin	Parts	0	8th July 2009 03:21 PM
Onkyo DX 330 needs help	phhphd	Digital Source	0	27th March 2008 04:36 PM
Help: Schematic for Onkyo DX706	derekyu	Digital Source	0	12th November 2007 05:06 PM
Onkyo M-504 needs help pls	Revenoor	Solid State	0	21st October 2007 11:35 PM
Onkyo M 508	beks	Solid State	18	31st May 2004 08:25 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read