Hirez SACD and DVD-A digital output for Pioneer DV-575A and DV-578A (dsd to pcm)

[oehlrich]

Sorry, only DV-600 is supported.

[WuzZeH]

Hi,

New to the forums, I'm very interested in your kit, could you send me a message / e-mail via my profile? I can't contact you via your profile due to new member restrictions.

Thanks

[oehlrich]

Originally posted by WuzZeH
Hi,

New to the forums, I'm very interested in your kit, could you send me a message / e-mail via my profile? I can't contact you via your profile due to new member restrictions.

Thanks

Hello,
if I try I get the Message:
--------------
Sorry! That user has specified that they do not wish to receive emails through this board. If you still wish to send an email to this user, please contact the administrator and they may be able to help.
--------------
So sorry, I can't
Charly

[WuzZeH]

Hi,

I've now edited my profile, could you try again please?

Thanks

[WuzZeH]

Charly, I've responded to your e-mail.

[Tranceformer]

Hi Charly,

Do you still sell the boards? I am very interested to buy one. Please send me a mail.

Thanks
Vic

[Tranceformer]

Hi Charly

thanks for the quick answer and the good news. I am interested in the extended kit with XO clock. I will send you a separate email.

By the way I am using the DCX2496 DSP board (without the frontpanel) in combination with a selfmade I/O board with 6 chanel volume control. The volume can be controled with a pot or a remote control. All this is mounted with 6 amplifier chanels in a single case.

I am using the spdif input mod from selectronic.fr. As far as I know this kit is based on your design. I was surprised about the big sound improvement after installation. I would describe it as more deep, more analog sound. I am talking now about an improvement on ordenary CD's with 16Bit/44KHz.

In the next step will try high resolution audio from SACD or DVD-Audio connected to the spdif and therfore I will order your kit.

Thanks for your great work!
Vic

[Tranceformer]

Hi Charly,

thanks for the quick delivery. The board has a real good quality. I have attached a picture of the unfinished board. I used some parts that I had at home . As you can see I have used some foil capacitors instead of ceramic. If you think this is critical (ESR) I will change them. It was not easy to solder the AD1896 but I think finaly I made it. Is there a possibility to test anything before I order the DVD player?

Vic

[oehlrich]

Vic,
without player seems to be difficult to test.

If you like to be sure you can send it to me ans I can insert it in my unit

Charly

[Tranceformer]

Hi Charly,

I ordered the missing components for the board and the DV-600 player from one source (Conrad) for 200,- € including shipping. So I will do the upgrade and test the board by myself. But anyway thanks for your great support!
I like the idea to have a "HighEnd" SACD and DVD-Audio source for such a low amount of money.
I will let you know about the progress.

Thanks
Vic