Digital sound - diyAudio
Go Back   Home > Forums > Source & Line > Digital Source
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 26th July 2001, 04:32 PM   #1
diyAudio Member
Join Date: Jul 2001
Hello everyone,

Hi, I been interested in audio electronics for a while and have only just come across this forum. I was wondering if there was a digital audio section. I'm interested in setting up a high bandwidth network to stream audio throughout my house and was wondering if anyone knew anything about it??

  Reply With Quote
Old 27th July 2001, 01:28 PM   #2
diyAudio Member
Join Date: Jun 2001
Location: Alexandria, VA USA
Default Digital area for DIY?

While this is not directly on topic, this concept is gaining merit. Given the number of chips that are coming out - such as the ones that contain a DAC and AMP on one, which to me seems like a pretty cool project for some speaker builder - it seems that there will be a crossover from one area to another to another coming on. I know that I would like folks who might be playing with these to let us know what is happening. Secondly, with so many digital streams coming on, Internet now, sat, IBOC for radio, etc, this will just grow. Having heard with my own ears some of these (IBOC, SDAR, Internet) we are going to have to work to make these sound even reasonable.
  Reply With Quote
Old 28th July 2001, 12:19 AM   #3
paulb is offline paulb  Canada
diyAudio Member
Join Date: Jun 2001
Location: Calgary
Default Digital audio over wireless

I've been searching for some time for a convenient way to distribute high-quality audio all over my house, including the back yard. Knowing some people in the wireless industry has led me to think that the best solution is a digital wireless link of some kind (the remote speakers you see are, I believe, 900 MHz analog technology). So count me in as an interested party for a digital forum here.
  Reply With Quote
Old 28th July 2001, 12:03 PM   #4
diyAudio Member
Join Date: Jul 2001
Lightbulb A few problems

Obviously the biggest problem trasmitting audio is the bandwidth required. PCM raw audio takes a massive digital bandwidth.
I'm not sure how to overcome this. Does anyone know about the S/PDIF protocol?? This is the usual link used between CD players and offboard DACs for example. This format transmits the required bandwidth for stereo audio, maybe the hardware could be adapted slightly to transmit over longer distances.
Any ideas??

Oh and by the way a digital audio forum would be a brilliant idea
  Reply With Quote
Old 28th July 2001, 06:08 PM   #5
diyAudio Member
Join Date: Jun 2001
Location: Alexandria, VA USA
Default Digital area for DIY?

I work in the broadcast distribution area - Satellite in particular, but when building IFL (inter facility links) we are using all kinds of solutions. Wireless, microwave, fiber, cable, ISDN, etc. All most all of this stuff has required multi thousand dollar equipment at each end, with codecs in the middle. All of that really high end trying to make the signal path as clean as possible (I work in public radio, so sound is actually important, as opposed to just transmitter saturation - no 110% modulation for us). Well out of the range of a DIY.

But the possibilites are opening up for us. 2.4ghz is open season in the US (up to one watt), especially since this area has been abandoned by the telcoms as they have moved up in gHz for more bandwidth.

Regardless of the method, what has become real clear is that we have to stay away from transcoding - changing from one codec, or bitrate or anything. We really need to distribute *one* thing. AES has sorta become the broadcast standard. MPEG4 may be the future, especially since it looks like the Asians and the German/Dutch have squared off to make the "super system".

So the system of the future may be distributing from source, all digital, all the way directly to the speaker. Perhaps even the individual driver, since it seems that it will be possible to design a DAC, "Crossover network", and Amp in a small enough package tailored and tuned for each driver. Video will tag along too.

The wrench in the system will be the intellectual property owners. For example, in the SDAR's (XM, Dogstar) there will be *no* digital output. Only analog - that is the deal they had to cut with the RIAA. Even with the actual digital signal being beaten to with an inch of it life by lossy compression. Same with IBOC (the method proposed for digital radio). Trying to re-digitize this will sound horrible. CD's coming out now are putting in data noise as ways to stop pure digital chains that might possibly lead to recording.

Whats that mean? We are going to have to hack it (I say that in the nice way.. all of us here are hackers in the traditional sense of the word. We like to play with our stuff, learn how it works, make it better, as opposed to just taking it the way the manufactures give it to us). Across the pond, ya'll have seemed to have beaten the Region coding on DVD's pretty quick. We are going to have to do the same on other formats soon.

Just some random thoughts....
  Reply With Quote
Old 28th July 2001, 10:50 PM   #6
blmn is offline blmn  Brazil
diyAudio Member
blmn's Avatar
Join Date: Feb 2001
Location: .
Default Ethernet networks?

I don't exactly how or even if it's possible to apply this to High Fidelity, but I'm using IP multicast transmition to transmit audio and video to my corporation (26 floor building and other 9 branches) and and the results are very good. The people wich operate the system can use CD quality audio if they want. I think it is a cheaper solution.
  Reply With Quote
Old 28th July 2001, 11:51 PM   #7
diyAudio Member
Join Date: Jun 2001
Location: Alexandria, VA USA
Default Hi FI...

First thing is are we going to accept "is digital anything" Hifi. I think we are going to have to - so little "software" is analog. That being said, I think it is open season. In broadcast, we run AES on ethernet cable all the time. Kloss and Studer make pretty incredible mix desks that are basically computers now. People have been making records using ISDN links, with artists in multiple cities for several years.

I know that is holy war stuff, but if we have to have digital, at least we can work on making it sound decent.

Now, we just have to figure out how to do it cheap enough for mortals. I could design an ethernet soluton for your home using computer based parts, but that is a little too expensive. The broadcast industry is going that way - XM has 25terrabytes of spinning disks with hundreds of thousands of CD's stored on them. All available from a pick list - instantly. I want one of those.
  Reply With Quote
Old 29th July 2001, 09:09 AM   #8
diyAudio Member
Join Date: Jul 2001
"They" have also designed a digital amp which uses a positive and negative cycle PWM of the data which then only requires a low pass filter. No analogue components in the whole chain!!
How would I set up an ISDN link around the house. I design electronics, embedded microcontrollers, (mostly 32bit cores), would an ISDN link be able to interface to a normal UART or SPI??
What would be good is if my main house PC can connect to a few microcontroller cards around the house which control the network and human interface.
Any help would be great.

[Edited by knuckles_mctug on 07-29-2001 at 04:12 AM]
  Reply With Quote
Old 29th July 2001, 10:23 AM   #9
diyAudio Member
Join Date: Jun 2001
Location: Alexandria, VA USA
Default Hmm..

I am speaking without actually designing anything here yet - so its a little out of my ***, as one might say - and it is 4:30am. Do we want wireless, or is wired OK?

Wired is easy. I have to look it up, but running it around your house is pretty easy with a computer. Commercial software routers for this are all over the place - bits is bits, the key is when to decode. Digigram makes a great card for this - up to four input/outputs at a time. Takes SPDIF and give you AES. They also make a AES/SPDIF transformer (See Cirrus Devices for some white papers), and once you get to AES, all kinds of equipment plays with it, mixers, computer programs, recorders, MIDI, even Genelec monitors play it out direct (and sound pretty damn good at it, too). You are then playing with the sound at the un-decoded bit level, so you will not be intoducing digital artifacts that are not already there. One issue here is that there needs to be a master clock in all of this so that all the timecoding signals are in sync.

Wireless is harder. You are now trying to do this and adding in a step. I suppose one could use the 803.11 (airport for mac folks)standard. These base stations and cards and such are getting cheaper, but still rely on ethernet. Problem with ethernet is that it does not garantee delivery on time in order of all packets. Obsticals to overcome. But in a house, under 300 meters, this should not be a problem at all. I know of radio stations that are using comsumer level equipment to make short bounces from studio to studios using the "rabbit" type TV equipment. The Video links have plenty of bandwidth and pass AES no problem.

A little work and we could come up with something. I know a commerical system that could do it in about a minute (it is just 4k a copy). Some of the less expensive stuff (ProTools, etc might with plug ins) Getting it cheap might be some work, but hell, thats half the fun in DIY. If you run a Mac, you are ahead of the PC crowd.

As I sit and write this, I see the convergence with home studio stuff. They are concerned with recording it, we are concerned with playing it. Funny how all this digital stuff is just getting into one big pile.

Have to quiz a buddy - he just put in one of these networks with over 80 workstations. I suspect he has this simple problem licked.

My fun is going to try to build my first true digital speaker. When it says digital ready on the front, it will mean it.
  Reply With Quote
Old 6th November 2001, 08:20 AM   #10
Ignite is offline Ignite  Canada
diyAudio Member
Join Date: Jul 2001
Location: Toronto, Ontario, Canada
Send a message via ICQ to Ignite
Default Re: A few problems

Originally posted by knuckles_mctug
Obviously the biggest problem trasmitting audio is the bandwidth required. PCM raw audio takes a massive digital bandwidth.
The answer to that is compression. MPEG-3, Ogg Vorbis, etc. Most of these technologies compress 10:1 with almost the same quality to the original data. The major problems with these is that the process to compress the audio with any precision takes much longer than realtime. LAME is about the most widespread, and definitely the fastest software mp3 encoder out there. But it is still far from realtime.

Software and hardware will eventually be able to do it in realtime, perhaps there is hardware that can now. However it's unlikely the RIAA wouldn't sue the pants off of anybody who tried, regardless of the use.

Online streaming MPEG "radio" is widely available ( for WinAMP, I'm sure Microsoft has reciprocated this idea with thier own Windows Media Player) nowadays, with many servers delivering 128kbit MP3, which is near CD-quality. It's only 16kbytes/s. A single DSL, cable or satellite link could listen to many servers at once at 128kbits. The answer is not in the airwaves, it's in the internet.

A sidenote: Windows Media Player format or RealPlayer format don't come close to the quality of a good VBR MP3. Ogg can make smaller files or slightly larger files with near-archive quality.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Best digital sound production CD's renfrow Music 2 13th January 2007 03:09 AM
help to select sound card - need only digital out kyselym Digital Source 6 14th April 2006 05:08 AM
digital sound filter electro samurai Digital Source 6 12th April 2004 04:53 PM
Dolby Digital 5.1 amp for Sound Card dracul Everything Else 3 29th August 2003 04:37 AM

New To Site? Need Help?

All times are GMT. The time now is 04:33 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2